1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. 43PUS6504/12
  6. Service manual

Philips 43PUS6504/12 Service Manual

Hide thumbs Also See for 43PUS6504/12:
Table of Contents

Advertisement

Quick Links

Download this manual
Published by Doris /SC 1917 Quality
2019
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Chassis name
Platform
TPM19.6E LA
MTK5806
Subje ct to modification
TPM19.6E
Model name
43PUS6504/12
43PUS6704/12
43PUS6804/12
50PUS6504/12
50PUS6704/12
55PUS6704/12
LA
3122 785 20940
2019-Apr-23

Advertisement

Table of Contents
loading

Related Manuals for Philips 43PUS6504/12

Summary of Contents for Philips 43PUS6504/12

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 2: Table Of Contents

    Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 3: Product Information

    • The setting Optimal* allows maximum up to Ultra HD For more specification details of this product, see (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0 www.philips.com/TVsupport signals. • The setting Standard allows maximum up to Ultra HD Display Resolution (50Hz or 60Hz) YCbCr 4:2:0 signals.
  • Page 4 – MPEG-4 AVC (H.264) is supported up to High and MCPC • LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity Profile @ L5.1. 30Mbps – H.265 (HEVC) is supported up to Main / Main 10 selection 14/18V, Band selection 22kHz, Tone burst mode, LNB current 300mA max Profile up to Level 5.1 40Mbps –...

  • Page 5: Precautions, Notes, And Abbreviation List

    4. Switch “off” the set, and remove the wire between the to the diversity tables for the correct values. • The correct component values are listed on the Philips two pins of the Mains/AC Power plug. • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
  • Page 6 • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
  • Page 7 • Always respect voltages. While some may not be originating from the USA and used e.g. in dangerous in themselves, they can cause unexpected LATAM and AP-NTSC countries reactions that are best avoided. Before reaching into a B-TXT Blue TeleteXT powered TV set, it is best to test the high voltage Centre channel (audio) insulation.
  • Page 8 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
  • Page 9 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
  • Page 10 Thin Film Transistor toward external amplifier Total Harmonic Distortion Vestigial Side Band; modulation method TMDS Transmission Minimized Differential WYSIWYR What You See Is What You Record: record Signalling selection that follows main picture and Transport Stream sound TeleteXT WXGA 1280 × 768 (15:9) TXT-DW Dual Window with TeleteXT XTAL...

  • Page 11: Mechanical Instructions

    3. Mechanical Instructions 3.1 Cable Dressing ECN701 MAIN POWER SUPPLY SSB (1053) (1054) CN601 ECN408 CN415 Cable dressing (43"50" 6504 series) ECN601 ECN415 ECN601 ECN401 KEY BOARD LOUDSPEAKER LOUDSPEAKER (1057) WIFI MODULE (1184) (1184) (Wifi02) IR/LED BOARD (1056) Back cover overview (43"50" 6504 series)
  • Page 12 CN416 ECN701 SSB (1053) MAIN POWER SUPPLY (1054) CN601 ECN408 CN415 Cable dressing (43" 6704/6804 series) Ambilight Ambilight (1061) (1061) EXA04-2 EXA04-1 EXA04 ECN415 Ambilight Ambilight (1061) (1061) ECN416 ECN03 ECN02 ECN601 ECN601 LOUDSPEAKER WIFI MODULE LOUDSPEAKER (Wifi02) (1184) (1184) IR/LED BOARD (1056) Back cover overview (43"...
  • Page 13 ECN701 CN416 CN701 CN9102 SSB (1053) MAIN POWER SUPPLY CN601 (1054) CN415 ECN408 Cable dressing (50"/55” 6704 series) Ambilight Ambilight (1061) (1062) EXA04-1 EXA04 EXA04-2 ECN401 Ambilight (1061) Ambilight (1061) ECN03 ECN416 ECN601 ECN415 ECN601 ECN02 LOUDSPEAKER WIFI MODULE LOUDSPEAKER (Wifi02) (1184) IR/LED BOARD...

  • Page 14: Assembly/Panel Removal

    3.2 Assembly/Panel Removal 3.2.1 IR board Control Unit 1. Unplug the connector from the SSB. Caution: be careful, as these are very fragile connectors! 2. Remove fixation screws [1] and connector [2] from the IR board control unit. 3. Remove the IR lens, IR board from the DECO_REAR_COVER. When defective, replace the whole unit.
  • Page 15 3.2.3 Rear Cover Warning: Disconnect the mains power cord before removing the rear cover. 1. Remove all fixation screws [1] ，[2]and [3] that secure the Back cover assy. 2. Unplug the connector that marked by red box below from SSB. 3.
  • Page 16 3.2.4 Keyboard Control Unit 1. Release the connector from the SSB Board. Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors! 2. Remove all the fixation screws from the keyboard control panel [2] and take it out from the Back cover. When defective, replace the whole unit.
  • Page 17 3.2.5 Small Signal Board (SSB) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB. 1. Release the clips from the LVDS connector that connect with the SSB[1]. Caution: be careful, as these are very fragile connectors! 2.
  • Page 18 4. Remove the stand bracket as described earlier. 5. Remove the IR/LED as described earlier. 6. Remove the fixations screws that fix the metal clamps to the front bezel. Take out those clamps. 7. Remove all other metal parts not belonging to the panel. 8.

  • Page 19: Service Modes

    4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Service Alignment Mode (SAM).   Factory Mode. Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. ...
  • Page 20 – (De) activate the selected menu item. – (De) activate the selected sub menu. – Change the value of the selected menu item.  When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the background).
  • Page 21 Remark: Under main menu “NVM editor”, select “Service Data”, you can use the UP/DOWN keys to view and change the set Type number, the set Production Number or the 18AC of a part.(The NVM-editor still has the same function as before, alpha-numeric entry.) 4.3 Factory mode: Purpose To perform extended alignments.
  • Page 22 How to Exit the Factory mode  Select EXIT_FACTORY from the menu and press the “OK” button. Note: When the TV is switched “off” by a power interrupt, or normal switch to “stand-by” while in the factory mode, the TV will show up in “normal operation mode”...
  • Page 23 5. Software Upgrading, Error code and Panel Code 5.1 Software Upgrading 5.1.1. The following update is for .pkg file. 1. Rename the file to “upgrade_loader.pkg”. 2. Prepare a USB memory (File format: FLAT, Size: 1G~8G). 3. Copy the software to USB flash disk (root directory). 4.
  • Page 24  If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care 1. Connect your USB flash drive (containing the software update) to the USB connector on the TV. Wait 30 seconds or until the USB drive is recognized by the TV.
  • Page 25 is not yet in the error code buffer, it is displayed at the left side and all other errors shift one position to the right. An error will be added to the buffer if this error differs from any error in the buffer. The last found error is displayed on the left. An error with a designated error code never leads to a deadlock situation.
  • Page 26 Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the panel type: see column “Set Option Code” in below tab. After resetting the Display Code, restart the set immediately. Set Option CTN_ALT BOM# Panel Type Code 43PUS6504/12 TPT430U3-EGYSKA.G S3 43PUS6704/12 TPT430H3-QUBH10.K SD9P0A 43PUS6804/12 TPT430U3-QVN03.U S0B1U 43PUS6804/12 TPT430H3-QUBH10.K SD9P0C...

  • Page 27: Trouble Shooting

    Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
  • Page 28 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
  • Page 29 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...

  • Page 30: Electrical Diagram

    7. Electrical Diagram Block diagram...
  • Page 31 7.2 Power Supply Power architecture of this platform. AUDIO LVDS Platform power Display power CN8601 ON/OFF Platform PS_ON MT5806 12V_A CN701 AC-input + Main filter AC IN 7.3 Power tree...
  • Page 32 7.4 Power layout SSB R703, +5V_STB R577, +5V_SW C789 +12V PANEL C250, Main_12V C111, +5V_USB Power SSB Top View...
  • Page 33 R769, DVDD3V3 C128, +3V3_TUNER Power SSB Bottom View...

  • Page 34: Ic Data Sheet

    8. IC Data Sheets 8.1 MT5806IFEQ (IC U401--Scaler)
  • Page 35 8.2 AD82072-LG48NRY (IC U601--Audio)
  • Page 36 8.3 SI2169-D60-GMR (U718)

  • Page 37: Circuit Diagrams

    9.Circuit Diagrams 9.1 A 715GA018 PSU(For 50”/55” 6704 Series) 9-1-1 AC Input C9911 220PF 250V SG9901 C9913 F9901 T 5 A H 2 5 0 V DSPL-501N-A21F 470PF 250V 5A 250V F o r B D 9 9 0 1 HS9901 FB9901 NC/HEAT SINK...
  • Page 38 9-1-2 PFC with LD7592S C9805 NC/47PF Vsin D9801 FMNS-1106S L9801 L9802 240uH NC/170uH C9806 C9818 C9819 1000pF 2.2NF NC/1000pF Q9801 R9804 C9801 C9802 C9803 TK13A60D 47UF 450V 47UF 450V 1.5M 1% NC/47UF 450V C9804 R9803 R9802 33 OH M 1/4W 47OHM 1uF 450V C9817...
  • Page 39 9-1-3 LLC with SSC3S927 C9181 F o r Q 9 1 0 1 Q 9 1 0 2 NC/2.2nF 50V R9191 R9103 R9101 R9100 R9102 3M 1% 36K OHM 3M 1% 0R05 1/ 4W C9101 H O T HS9101 C O L D R9192 1000pF 2KV HEAT SI NK...
  • Page 40 9-1-4 Driver with PF7904 C8621 NC/2.2nF 50V L8601 C8622 33uH NC/2.2nF 50V FB8602 BEAD FB8601 BEAD +VLED Boost_Vin FMEN-2308 R8608 R8609 100K 100K C8608 100N 50V L8602 NC/33uH R8601 R8603 Q8601 10 OHM TK22A10N1 CN8601 C8609 CONN D8602 R8604 R8606 NC/47pF 2KV 1N4148W 5.6R 1%...

  • Page 41: 715Ga052 Psu

    9.2 A 715GA052 PSU (For 43”50” 6504, 43” 6704&6804 Series) 9-2-1 AC Input F9902 T 5 A H / 2 5 0 V 5A 250V FB9901 D9901 BEAD NR9902 SG9901 PG4007 Spark Gap 500V F9901 T 5 A L / 2 5 0 V NC / 5A 250V BD9901 C9913...
  • Page 42 9-2-2 PFC with LD7592GS L9802 C9801 NC / 240uH 47pF FB9802 E Q 3 2 BEAD D9801 Vsin FB9801 L9801 FB9805 FMNS-1106S 127R 240uH BEAD Q9801 R9804 IPA60R400CE C9804 1.5M 1% 1UF 450V R9803 R9802 D9804 C9817 C9805 NC / 2200PF2KV 22pF 2KV Rsen- 禯= 5 .
  • Page 43 9-2-3 Main Power HS9123 36 KOHM +-1% 1/ 8W R9103 HEAT SINK R9101 R9100 F o r D 9 1 2 3 3M 1% 3M 1% R9191 +Vboost H O T C O L D C9102 2.2NF 10% 50V D9123 R9192 2 4 V / 3 .
  • Page 44 9-2-4 LED L8602 L B : 2 . 1 2 FB8601 BEAD +VLED L8601 FB8602 15uH BEAD C8603 C8604 +Vboost R8601 R8603 75 KOHM +-1% 1/ 8W HS8601 10 OH M 5% 1/ 8W R8602 10K OHM D8602 R8604 R8606 5.6R 5% 10K OH M 5% 1/8W SS1060FL...

  • Page 45: 715G9907 Ssb

    9.3 B 715G9907SSB 9-3-1POWER 2K19 MT5806 platform Main_12V U701 +5V_STB U702 R T 5 0 9 0 AON7934 3V3SB 3V3SB_SOC Main_12V C4122 C4153 C4155 U707 2 . 9 5 A R750 R701 SY 8089AAAC L704 10uF 16V 10uF 16V NC/10uF 16V R4130 C4104 2.2uH...
  • Page 46 9-3-2 System Power A I N BL_DIG_DIM 3V3SB 3V3SB DVDD3V3 OPWRSB_PWR BL_ON/POK CN701 NC/BZT52-B22 Normal: Low R S B : DVDD3V3 DVDD3V3 NC/BZT52-B22 Stand_by: Hi R709 R768 R769 ZD707 NC/4.7K1/16W NC/4.7K1/16W 15K 5% R706 R705 ZD708 10K 5% 4K7 5% R771 AU_12V AU_12V...
  • Page 47 9-3-3 Peripheral U401-7 3V3SB STB_SCL U A R T P o r t STB_SCL AK15 OSDA0 U0TX STB_SDA OSDA0 U0TX STB_SDA AJ15 OSCL0 U0RX OSCL0 U0RX OPWRSB 3V3SB OPWRSB OSDA1 U1TX TP401 SY S_EEPROM_WP OSDA1 U1TX SY S_EEPROM_WP OSCL1 U1RX TP402 OSCL0 OSCL1...
  • Page 48 9-3-4 DRR4*2 D D R 4 # 1 D D R 4 # 2 U401-1 U403 U402 EMI0_A0 EMI0_DQM0 EMI0_A0 EMI0_DQM0 EMI0_A1 EMI0_DQS0_T MTP47 EMI0_A1 EMI0_DQS0_T EMI0_A2 EMI0_DQS0_C MTP48 EMI0_DQ0 EMI0_A0 EMI1_DQ0 EMI1_A0 MTP1 MTP24 EMI0_A2 EMI0_DQS0_C DQL0 DQL0 EMI0_A3 EMI0_DQ1 EMI0_A1 EMI1_DQ1...
  • Page 49 9-3-5 DRR4*2-2 D D R 4 # 3 D D R 4 # 4 U401-2 U404 U405 EMI2_A0 EMI2_DQM0 EMI2_A0 EMI2_DQM0 EMI2_A1 EMI2_DQS0_T MTP101 EMI2_DQ0 EMI2_A0 EMI3_DQ0 EMI3_A0 MTP55 MTP77 EMI2_A1 EMI2_DQS0_T DQL0 DQL0 EMI2_A2 EMI2_DQS0_C EMI2_DQ1 EMI2_A1 EMI3_DQ1 EMI3_A1 MTP102 EMI2_A2 EMI2_DQS0_C...
  • Page 50 9-3-6 YPbPr/CVBS/SPIDIF A n a l o g P o w 3 V 3 U401-5 DVDD3V3 AN28 AN26 ADCINP_DEMOD COM0 ADCINP_DEMOD COM0 AP28 AP26 ADCINN_DEMOD PB0P ADCINN_DEMOD PB0P AM26 PR0P PR0P AM25 Y 0P AVDD105_STB Y 0P AN25 IF_AGC SOY 0 3V3SB_SOC IF_AGC SOY 0...
  • Page 51 9-3-7 AUDIO AMP PVDD 獶 跋 8 x 1 0 . 2 m F o r c l o s e S o C A l l P a t h r o u n d i n g ( 2 0 m i l ) AOMCLK MCLK...
  • Page 52 9-3-8 VB1 output T 5 8 0 6 V x 1 U T P U T C l o s e S o C CN408 U401-3 CONN 51P C4959 100NF 16V SOC-VB1-TX0p VB1_1P AVDD105_VB1_STB C4960 100NF 16V SOC-VB1-TX0n AVDD105_VB1_STB VB1_1N AVDD105_VB1_STB SOC-VB1-TX1p C4961...
  • Page 53 9-3-9 HDMI* U401-6 R501 AE29 AA32 HDMI_CEC RX_0_0 A n a l o g P o w HDMI_CEC HDMI_0_RX_0 AA31 RX_0_0B 100R 5% HDMI_0_RX_0B AG30 AA34 HDMI_0_SCL RX_0_1 C l o s e c o n n e c t o r HDMI_0_SCL HDMI_0_RX_1 AH27...
  • Page 54 9-3-10 Tuner & Demod* +3V3_TUNER TU203 T U N E R T 2 / T U N E R R140 R141 +3V3_TUNER 4K7 5% TU202 T U N E R I 2 C TUN_SCL 4K7 5% Ant. PW R R134 +3V3_TUNER R135 TUN_SCL...
  • Page 55 9-3-11 LNB & EXT AV INPUT L201 D505 Main_12V 10uH SR24 C250 C298 C243 C240 C244 10uF 16V 10uF 25V 10uF 25V 10uF 25V 100NF 25V TUNER_LNB TUNER_LNB TUN_LNB E S D & S u r g e Protect TUN_LNB DISEQC_OUT DISEQC_OUT LNB_EN...
  • Page 56 9-3-12 Internal CI C L O S E C O N N E C T O R CI_DVDD3V3 4,5,6,7,8,9,10,11,12,13,14,16,17,18,19,20,21,22 CI_DVDD3V3 CI_DVDD3V3 CI_DVDD3V3 CI2_VCC CI2_VCC 6 / 2 4 R1196 +5V_SW CI2_VCC R1187 R1188 R1189 R1190 R1191 10K 5% U711 10K 5% 10K 5% 10K 5% 10K 5%...
  • Page 57 9-3-13 WIFI/KEYPAD I R / K E Y B O A R D 4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22 3V3SB 3V3SB IR_SSB 8 / 2 0 K e y 6,22 IR_SSB IR_RC 6,22 IR_RC R163 R108 R109 FB403 6K8 1% 30R/600mA POWER_KEY 10K 1% POWER_KEY KEY _PAD0 17,22 KEY _PAD0...
  • Page 58 9-3-14 GPIO/ServAD U401-8 Y 30 CI_A0 DEMOD_RESET CI_A0 G P I O 0 DEMOD_RST AA28 CI_A1 DEMOD_TSCLK 4,5,6,7,8,9,10,11,12,13,14,15,16,18,19,20,21,22 CI_A1 DEMOD_TSCLK G P I O 1 CI_A2 Y 27 DEMOD_TS0 CI_A2 G P I O 2 DEMOD_TSDATA0 AA29 CI_A3 CI_A3 G P I O 3 DEMOD_TSDATA1 CI_A4 AB29...
  • Page 59 9-3-15 USB/ETHERNET PHY* E T H E R N E T P H Y A l l P a t h U S B ( U S B 3 . 0 ) Grounding(20mil) T101 NC/S16013 LF R J 4 5 U401-10 USB_DP_P2 R1105...
  • Page 60 9-3-16 VCCK & DVSS VCCK CPU_P CPU_GPU_P U401-12 U401-11 AB16 VCCK CPU_P MT5806IFEQ AB17 VCCK CPU_P AB12 VCCK CPU_P AB13 VCCK CPU_P AB14 DVSS DVSS VCCK CPU_P AB15 DVSS DVSS VCCK CPU_P AD15 DVSS DVSS VCCK CPU_P AD16 DVSS DVSS VCCK CPU_P AD12...
  • Page 61 9-3-17 DDP POWER +5V_STB DDRV R4361 2.2R 1/10W C4395 C4476 C4474 100NF 16V R4362 10uF 16V 1UF 50V U717 100K 1% +5V_STB VREF VCNTL DDR_VTT VOUT R4365 RT9045GSP NS/10K R2001 Q786 R4363 C4475 100K 1% 10NF 50V R4360 2N7002K DDR_VTT_CTRL C4394 C4396 C4477...
  • Page 62 9-3-18 HP AND SPDIF A n a l o g P o w AVDD3V3_SOC AVDD3V3_SOC AVDD33_ADAC AVDD33_AADC C4415 C4422 C4416 100NF 16V 100NF 16V 10uF 16V A u d i o o u t U401-4 AN34 AN33 AIN_R0 AR0O AIN_R0 AR0_ADAC AIN_L0 AP32...
  • Page 63 9-3-19 AMBILIGHT & Hotel TV C N 4 1 6 : F o r P H P 6 X X X A L + K E Y + I R + L E D LED_RE R4501 0R05 1/ 16W 16,17 KEY_PAD0 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 ZD127...
  • Page 64 9.4 E 715G8623 IR Board (For 43”50” 6504 Series) 9-4-1 IR Light Sensor CN201 R223 R224 R225 R226 R227 R228 R229 I2C ADDR LED_R DVD3V3 DVD3V3 JSA-1130 0x44 RC-IR C222 1uF 10V JSA-1130 0x45 3V3SB LS_SCL R225 0R05 1/16W C221 100N 16V DVD3V3 LS_SDA...
  • Page 65 9.5 E 715GA039 IR Board (For 43”50” 6704 Series) 9-5-1 IR&STB LED&Light sensor L i g h t S e n s o r DVD3V3 U222 DVD3V3 R 2 2 3 R 2 2 4 R 2 2 5 R 2 2 6 R 2 2 7 R 2 2 8 R 2 2 9...
  • Page 66 9.6 E 715G9740 Keyboard control panel (For 43”50” 6504/6704 Series) 9-6-1 Key...
  • Page 67 9.7 715GA031 AMBI Panel (For 43” 6704 Series) 9-7-1 TLC5971 +12V +12V T P V i s i o n u s e d p a r t o n l y , n o t T P V A V L XA02 XA05 R e f e r e n c e...
  • Page 68 9-7-2 Ambilight 8-LED +12V NC/22R R017 D006 D007 D008 PWM2-B1 R018 NC/560R PWM2-R1 PWM2-G1 C012 C013 100NF 25V NC/100NF 50V P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 R024 560R R040 22R 1/ 16W 5% R021 560R R041 22R 1/ 16W 5% R022 560R R042 22R 1/ 16W 5% R023 560R...
  • Page 69 9.8 715GA032 AMBI Panel (For 50” 6704 Series) 9-8-1 TLC5971 +12V +12V XA02 XA05 +3V3 C003 100N16V R012 27K 1/ 16W 5% R008 10K 1% R011 +3V3 10K 1% S002 NC/0R05 1/ 16W U001 D100 1IN+ VCC+ AMBI-TEMP 1IN- C002 R007 LMV321IDCKR AMBI-TEMP...
  • Page 70 9-8-2 Ambilight 9-LED +12V NC/22R R017 D007 D008 D009 PWM2-B1 R018 NC/560R PWM2-R1 PWM2-G1 C012 C013 100N16V NC/100NF 50V P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 R024 560R R040 22R 1/16W 5% R021 560R R041 22R 1/16W 5% R022 560R R042 22R 1/16W 5% R023 560R R043...
  • Page 71 9.9 715GA033 AMBI Panel (For 50” 6704 Series) 9-9-1 TLC5971 +12V +12V XA02 XA05 +3V3 C003 100N16V R012 27K 1/ 16W 5% R008 10K 1% R011 +3V3 10K 1% S002 NC/0R05 1/16W U001 D100 1IN+ VCC+ AMBI-TEMP 1IN- C002 AMBI-TEMP AMBI-TEMP R007 LMV321IDCKR...
  • Page 72 9-9-2 Ambilight 10-LED +12V NC/22R R019 D008 D009 D010 PWM2-B1 R020 NC/560R PWM2-R1 PWM2-G1 C012 C013 100N16V NC/100NF 50V P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 P5018/RSSGBB7-2K14 R021 560R R040 22R 1/ 16W 5% R022 560R R041 22R 1/ 16W 5% R023 560R R042 22R 1/ 16W 5% R024 560R R043...
  • Page 73 10. Styling Sheets 10.1 6504 series 43" 1050 0040 1053 1184 WIFI02 1184 1054 0030 0063 1057 1056 0036...
  • Page 74 10.2 6504 series 50" 1184 1050 1053 0040 WIFI02 0063 1056 1057 1184 0036 1054 0030...
  • Page 75 10.3 6704/6804 series 43” 0040 1184 1053 1050 1061 WIFI02 1184 1057 0036+1056 1054 0030...
  • Page 76 10.4 6704 series 50”/55” 1062 0040 1050 1063 1053 WIFI02 1057 1056 1054 1184 0030...

This manual is also suitable for:

43pus6704/1243pus6804/1250pus6504/1250pus6704/1255pus6704/12

Table of Contents