Getting Acquainted; Basic Transceiver Modes - Kenwood TH-G71A Instruction Manual

GETTING ACQUAINTED
ORIENTATION
Antenna
Tuning control
VOL control
On Air/Busy
lamp
PTT
switch
LAMP
/ key
jit __ Display
| Pear
=p Microphone
MIC jack
~~-— Keypad
6
SP jack (15
BASIC TRANSCEIVER MODES
This section introduces you to the basic modes you can
select on this transceiver.
VFO mode
Press [VFO] to select. In this mode you can change the
operating frequency using the Tuning control.
Memory Recall mode
Press [MR] to select. In this mode you can change
memory channels, using the Tuning control, where you
stored frequencies and related data. You cannot enter
this mode unless you program one memory channel at
least. For further information, refer to "MEMORY
CHANNELS" {page 17}.
NE SS CEPA hit