Oven Lights - Operation/Replacement - KitchenAid KEBS276X Use And Care Manual

At the end of the Self-Clean cycle:
* The Clean Indicator Light will go
out.
* The Lock Indicator Light will
continue to glow until the oven
temperature drops below 550?F.
The oven door cannot be opened
until the Lock Indicator Light goes
out. Do not turn Temperature
Control or Selector to OFF until
Lock Indicator Light goes out.
Oven self-cleaning tips:
* Evening is a good time to clean
the oven, after normal oven use is
completed.
* Small amounts of smoke escaping
from the oven vent are normal
when oven is heavily soiled.
Excessive smoke may indicate
heavy spillovers have not been
wiped up.
* Do not force the Oven Lock Lever
open when the Lock Indicator
Light is on. Damage to the lock
mechanism may result.
* To prevent accidental locking, the
Oven Lock Lever should always be
unlocked (positioned to the far
left) except when the Selector and
Temperature Control are set at
CLEAN. If accidental locking
Occurs, turn oven off. Allow oven
temperature to decrease so Lock
Lever can be moved. Do not force
Lock Lever. Wait until it moves
easily.
* Clean both ovens regularly, before
they become "excessively dirty." If
oven is not clean after one cycle,
repeat the Self-Clean cycle.
* After a Self-Clean cycle, any
powdery residue can be wiped
away with a damp cloth. If white
spots remain in the oven after a
Self-Clean cycle, remove them with
a non-scratch scouring pad before
using the oven again. These spots
are usually salt residues that
cannot be removed during the
Self-Clean cycle.
e If the soil removal was not
complete, increase the length of
the clean time in the next cycle.
28
Oven Lights -
Operation/Replacement
The oven lights in both ovens come
on when either oven door is
opened. To turn the light({s} on
when the oven door(s) is closed,
push the Oven Light Switch on the
control panel. Push the switch
again to turn off the light(s).
A WARNING
Electrical Shock and Personal
Injury Hazard
* Make sure oven and light
bulb are cool and power to
the oven has been turned
OFF before replacing a light
bulb. Failure to do so could
result in electrical shock or
burns.
* The lens must be in place
when using the oven. The
lens protects the bulb from
breaking, and from high
oven temperatures. Broken
glass could cause injury.
To replace an oven light bulb:
1. Turn off power at the main
power supply.
2. Unscrew lens from housing.
3. Unscrew light bulb and replace
with a 40-watt appliance bulb.
4. Replace the lens.
5. Turn power back on at the main
power supply.
IMPORTANT: Make sure oven light
is off during the Self-Clean cycle.
Keeping oven light on will shorten
bulb life.