2019/05/27 19:43:09 (GMT+09:00)
Service Adjustment
4-5. Accessing Serial Number Edit
1) Press
button on Remote to edit Serial Number.
Remote Commander
2) Press
or
button to select number
* The font color of YES is change to black when it is selected.
.
Remote Commander
3) Serial Number can be set
After user input data , press <Enter>.
Pop dialog will appear to inform user to confirm data.
or
button to select YES or NO.
Press
Select YES if input data is correct
Select YES if input data is correct.
Select NO if input data is incorrect.
Press <Enter> to save answer.
Screen Sample
ONLY
ONCE.
Screen Sample
Note: * The font color of YES is change to black when it is selected.
4) If
4) If
YES i
YES is
selected, the input data is saved into EEPROM.
l
t d
th i
t d t i
SERIAL NUMBER EDIT is grayed out and the serial number that has
been input is displayed.
User will
not able to edit
anymore.
Screen Sample
Screen Sample
Note : * The font color of SERIAL NUMBER is change to orange
after YES is selected.
Screen Sample
d i t EEPROM
135
SYS SET