Hitachi airCore 700 Installation & Maintenance Manual page 30

INSTALLATION & MAINTENANCE MANUAL
7.1.2.2 Zone Activation
This function is to enable or disable zone from zone1 to zone8.
Step1. Select "Zone Activation" and press "OK".
Step2. Press " " or " " to select zone, press " " to set to
"Activate", press " " to set to "None".
Step3. Press "OK" to save the setting and return to Zone
Installation Menu. Or press " " to return to Zone
Installation Menu without saving the setting.
NOTE:
•
The spill zone cannot be set to "None", the spill zone need to be cancelled first.
7.1.2.3 Zone Labeling
This function is to personalize the naming of zones and sensors.
Step1. Select "Zone Labeling" and press "OK".
Step2. Press " " or " " to select zone and press "OK".
Step3. Press " " to move cursor to font type.
Press " " or " " to select the font type.
*Each time you want to change the font type,
press " " to move the cursor back to font type.
*" " has a list of 12 typical zone names pre-entered, the
name will appear in the input box directly once the one is
selected.
Step4. Press " " to move the cursor to the keypad.
Press " ", " ", " ", or " " to select the font and
press "OK".(Up to 12 characters can be used for zone labelling.)
Step5. After all the characters have been set, select "
OK Select
OK Confirm
OK Select
OK Confirm
OK Select
" and press "OK".
Fin
26
Zone Installation Menu
Common Zone Setup
Zone Actisation
Zone Labeling
Nominate Spill Zone(s)
Sensor Assignment
Zone Activation
Item Status
Z1 | Bedroom 1 Sƒi Activate
None
Zone )
ZC | Aivin7 None
Zone E None
Zone U None
Zone Installation Menu
Common Zone Setup
Zone Actisation
Zone Labeling
Nominate Spill Zone(s)
Sensor Assignment
Zone saqelinw
Item Name
Zone 1 Bedroom 1
Bedroom %
Zone %
Zone ) Not 5et
Zone @ Hallway
Zone U Not 5et
Zone Labeling: Zone 1
ABC BeCroom 1 Living
BeCroom $ Main
abc
Dining Master
Sym.1
Downstairs Family
Sym.$
Hallway St“Cy
Kitchen Upstairs Fin
Font type Keypad
(Mon) 16:30
Back
Back
(Mon) 16:30
Back
BaWY
Back