Table of Contents
Advertisement
Please ensure that when the appliance is installed it
is easily accessible to an engineer in the event of a
breakdown.
All installations must comply with the local
authorities requirements for the discharge of
exhaust air.
Incorrect installation may affect the safety of this
cooker hood.
Installation Requirements
Before installation check the wall to
which the cooker hood is to be fitted for
electric cables, water pipes or gas.
The chimney hood must be installed according
to the instructions suppliers below and by qua-
lified and competent personnel to the relevant
National Standards.
The cooker hood is designed to be fixed to a solid block or
block wall over a cooking area. If not, suitable fixing must
be used for other types of walls. The hood can be used
in the extraction (ducted to the outside) or recirculation
(internal recycling) mode.
The Installation work must be undertaken by a qualified
and competent person. The manufacturer disclaims any
responsibility to damages due to incorrect installation of
the cooker hood or if the cooker hood is not installed in
compliance with relevant regulations controlling this type
of installation.
INSTALLING THE COOKER HOOD
���
�
���
Unpacking
Before unpacking the cooker hood position the carton with
the arrows pointing upwards as illustrated on the carton.
The canopy is supplied with the following components
for installation:
Ref. Q.ty Product Components
1
1
Hood Body, complete with: Controls, Light,
Blower, Filters
2
1
Telescopic Chimney comprising:
2.1
1
Upper Section
2.2
1
Lower Section
9
1
Reducer Flange ø 150-120 mm
14.1
2
Air Outlet Connection Extension
15
1
Air Outlet Connection
Ref. Q.ty Installation Components
7.2.1
2
Upper Chimney Section Fixing Brackets
7.3
1
Air Outlet Connection Support
12c
6
Screws 2,9 x 9,5
Q.ty Documentation
1
Instruction Manual
�����
�
���
���
�
13
��
����
Advertisement
Table of Contents
