Table of Contents
Advertisement
— Advanced Recording Operations —
Recording a still image on a tape – Tape Photo recording
You can record a still image onto a tape. This mode is useful when you want to print a
image using a video printer (optional). You can record about 510 images on a 60-minute
cassette.
Besides the operation described here, your camcorder can record still images on a
"Memory Stick" (DCR-IP7/IP7BT only) (p. 122).
(1) In standby mode, keep pressing PHOTO lightly until a still image appears. The
CAPTURE indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(2) Press PHOTO deeper.
The still image on the screen is recorded for about 7 seconds. The sound
during those 7 seconds is also recorded.
The still image is displayed on the screen until the recording is completed.
Notes
•You cannot make a tape photo recording during normal CAMERA recording.
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. The image may fluctuate.
•The tape photo recording function does not work during following operations:
– Fader
– Digital effect
If you record a moving subject with the tape photo recording function
When you play back the still image using other equipment, the image may fluctuate.
To use the tape photo recording function using the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder immediately records an
image on the screen.
To record clear and less fluctuated still images (DCR-IP7/IP7BT only)
We recommend that you record on a "Memory Stick."
1
PHOTO
2
PHOTO
CAPTURE
•••••••
47
Advertisement
Table of Contents
