Specifications - Sony STR-DE935 Operating Instructions Manual
Hide thumbs
Also See for STR-DE935:
- Service manual (68 pages) ,
- Operating instructions manual (57 pages) ,
- Service manual supplement (4 pages)
Table of Contents
Advertisement
:
;
$
Pov
eee
"elec
ealiticin
noite
en
et
otros
ena
COINS
Mire.
Specifications
AUDIO POWER —_isve
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 110 watts
(STR-DE935) and 100 watts
(STR-DE835/SE591) per
channel minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output
(USA model only).
Pegg) Fe
Amplifier section
POWER OUTPUT
Stereo mode
(8 ohms 20 Hz - 20 kHz,
THD 0.09%)
STR-DE935:
110W +110W
STR-DE835 /SE591:
100 W + 100 W
Surround mode
(8 ohms at 1 kHz, THD
0.8%)
STR-DE935:
Front: 110W + 110W.
Center: 110W
Rear®: 110W + 110W
STR-DE835 /SE591:
Front: 100W + 100W
Center": 100W
Rear': 100W
+
100W
a) Depending on the sound field settings and
the source, there may be no sound output.
Dynamic power output
STR-DE935:
165 W + 165 W, 8 ohms
250 W + 250 W, 4 ohms
STR-DE835 /SE591:
155 W + 155 W, 8 ohms
240 W + 240 W, 4 ohms
Frequency response
PHONO: RIAA
equalization curve
+0.5 dB
CD, TAPE, MD/DAT,
TAPE/MD, DVD/
LD, TV/SAT,
VIDEO 1, 2, and
VIDEO 3 (STR-
DE935 only):
10 Hz - 50 kHz +0.5/
-2 dB (with sound
field, equalizer, and
bass boost bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 2.5 mV
Impedance: 50
kilohms
S/N®: 86 dB (A, 2.5
mV)
5.1CH INPUT, CD,
DVD/LD, TAPE,
MD/DAT, TAPE/
MD, TV/SAT,
VIDEO 1, 2, and
VIDEO 3 (STR-
DE935 only):
Sensitivity: 150 mV
Impedance: 50
kilohms
S/N?). 96 dB (A, 150
mv")
b) INPUT SHORT
c) Weighted network, input level
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: —
Impedance: 75 ohms
S/N: 100 dB (A, 20
kHz LPF)
DVD/LD, TV/SAT,
MD/DAT (Optical):
Sensitivity: —
Impedance: —
S/N: 100 dB (A, 20
kHz LPF)
TAPE, MD/DAT
TAPE/ MD, (REC
OUT); VIDEO 1, 2
(AUDIO OUT):
Voltage: 150 mV,
Impedance: 10
kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1
kilohms
PHONES:
Accepts low- and
high-impedance
headphones
Outputs
BASS BOOST
+6 dB at 70 Hz
Sampling Frequency
48 kHz
EQ
BASS:
100 Hz~1.0kHz (21
steps)
MID:
500 Hz~5.0kHz (21
steps)
TREBLE:
1.0 kHz~10kHz (21
steps)
Gain levels:
+10 dB, 1 dB step
53
uoneUos
[EUONIPp
!
Advertisement
Table of Contents
