Welcome To The World Of Bravia; Connecting The Tv; Gable System Or Vhf/Uhf Antenna System - Sony BRAVIA KDL-19M4000 Operating Instructions Manual

Lcd digital color tv
Hide thumbs Also See for BRAVIA KDL-19M4000:
Table of Contents

Advertisement

Welcome
to the World of
B RAVIA®
Thank you for purchasing
this Sony LCD Digital Color Television.
This
manual is for model KDL-I 9M4000.
Be sure to check the supplied
accessories
against the list on page 39.
Connecting
the TV
To display clear crisp pictures, you must connect your TV correctly and select
the correct Wide Mode to display the picture in the correct aspect ratio (see
"Changing the Wide Screen Mode" on page 21). It is strongly recommended to
connect the antenna/cable input using the 75-ohm coaxial cable (not supplied)
to receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration. If
you use a 300-ohm twin lead cable, keep it as far away from the TV as
possible.
You can also connect a variety of optional equipment to your TV (see page 14).
For multiple equipment connections, please refer to the Quick Setup Guide.
Cable System
or
VHF/UHF
Antenna
System
Cable or VHF/UHF (or VHF only) Antenna
75-ohm coaxial cable
(not supplied)
__
Rear of TV
CABLE/ANTENNA input
From Cable settings in Channel
settings, select Cable On or Cable Off for
your type of input signal.
10

Advertisement

Table of Contents
loading

Table of Contents