Table of Contents
Advertisement
Timer Features
• Sleep Timer
• Program Timer
Special
Feature:
Automatic turn "OFF" after 90 minutes.
The TV has a special feature that will shut itself
OFF after 90 minutes when turned ON by the
program timer unless a function key is pressed
during the 90 minutes.
This feature is useful so that the TV will not
remain ON unattended for an extended period of
time.
Programming the OFF timer will also cancel the
automatic OFF feature.
Sleep Timer-
This feature is used for automatic
turn off in 30, 60 or 90 minutes.
NOTE: Display will flash 3, 2 and 1 to indicate the last
three remaining minutes prior to turn off. The
Recall display will also appear.
1.
Press the ACTION button to display the Main
Menu.
2.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Timer Icon.
3.
Press the ACTION button to display the Timer
Control Menu. SLEEP TIMER position should
already
be
highlighted.
If
not,
press
CH
UP/DOWN to highlight SLEEP TIMER.
4.
Press the VOL RIGHT button to select 30, 60 or 90
minutes (Sleep Timer will be activated).
5.
Press the ACTION button twice to exit the Timer
Control Menu.
NOTE: To deactivate
Sleep Timer repeat steps 1
through 4. In step 4 select "NO" instead of
minutes.
Helpful Hints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the time will display in the
bottom left corner.
Program
Timer
-
This feature is capable of
turning the TV on, tuned to a desired channel and off at a
predetermined time (one day or daily).
NOTE: The clock must be set for this feature to operate.
(Refer to the Set-Up Menu to set time.)
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH UP/DOWN
and VOL LEFT/RIGHT
buttons to highlight the Timer Icon.
3.
Press the ACTION
button to display the Timer
Control Menu.
4.
Press the CH DOWN button to highlight "ON" (time).
5.
Press the VOL LEFT or RIGHT button repeatedly to
set hours (set AM/PM accordingly).
6.
Press the CH DOWN button to highlight the minutes
position.
7.
Press the VOL LEFT or RIGHT button repeatedly to
set minutes.
8.
Press the CH DOWN button to highlight
"OFF"
(time).
9.
Repeat steps 5 through 7 for setting "OFF" (time).
10. Press
the
CH
DOWN
button
to
highlight
"CHANNEL".
11. Press the VOL LEFT or RIGHT button or use the
Remote Control Keyboard
to enter the channel
number desired when the set turns "ON".
12. Press the CH DOWN button to highlight "SET".
13. Press the VOL RIGHT button to select:
• NO - not activated
• ONE DAY - activated
• DAILY - activated
NOTE: The Timer light will come "ON" when Timer is
activated (In some Models).
14. Press the ACTION button twice to exit the Timer
Control Menu.
NOTE: To deactivate Program Timer select "NO" in step
13.
I Helpful Hints:
• If the Program Timer "ON" functions while the set is
operating,
the set will automatically
tune to the
channel designated in the Timer Program.
-17-
Advertisement
Table of Contents
