Table of Contents
Advertisement
A
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter "E" or by the earth
symbol
or coloured green and
yellow.
TECHNICAL INFORMATION
Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information is situated in the
rating plate, on the external or internal side
of the appliance and in the energy label.
B
C
D
E
2. Connect the wire coloured blue to the
terminal either marked with the letter
"N" or coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or
coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp (E) is
secure over the outer sheath.
Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING! A cut off plug
inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that it is disposed of
safely.
mm
mm
mm
Hours
Volts
Hz
873
540
549
20
230 - 240
50
13
Advertisement
Table of Contents
