Table of Contents
Advertisement
Before operation
@ Notes on cassette tape
@
Safety tab (accidental erasure prevention tab)
@ To store cassette tapes
After an important
recording
has been
finished,
break the
Do not store the tapes in a place which is subject to direct sun-
safety tab, to prevent
the
recorded
contents
from
being
light, or near equipment that generates heat.
Keep the cassette
erased or recorded on accidentally.
tapes away from any magnetic field.
)
o
g
Fa
For A side
@ When there is slack in the tape
in such a case, insert a pencil into the reel hole and wind the
reel hub to remove the slack.
To re-record
Cover with adhesive tape.
Apply tape only to the position
where the tab has been removed.
Notes:
1. 120-minute cassette tape:
2. Endless tapes:
Since a 120-minute cassette tape is very thin, the tape could
Do not use an endless tape, as this could damage the mecha-
adhere to the pinch roller or be easily cut.
It is recommended
nism of the unit.
that these tapes not be used with this unit to prevent possible
damage.
™@ Cleaning the head section
Cleaning the heads and peripheral
Demagnetizing the head
Cotton Swab
components:
When the recording/playback head is magnetized,
For maintaining the best condition of the deck
the sound quality will be deteriorated.
In such a
and for longer service
life, always
keep the
case, demagnetize the head using a commercially
Capstan
head
(recording/playback/erase),
capstan
and
available demagnetizer (head eraser).
f
pinch roller clean.
To clean them, perform the following:
Note:
1. Open the cassette holder.
There
are
precisely
aligned
parts
around
the
2. Using a cotton swab dipped in alcohol, clean
heads, including the tape guides.
the head (recording/playback/erase), capstan
When cleaning, pay special attention so as not to
Pinch Roller
and pinch roller carefully.
apply shock to them.
Tape guides
M@ Beware of condensation
the unit may not function correctly.
@ When a heater starts operating.
6 = M-97/97M(En)
Advertisement
Table of Contents
