Editing Using Two Playback VCRs
You can edit scenes from two different video tapes into
one, if two playback VCRs are connected to the unit.
Select the input source to be edited using the INPUT
SELECT buttons.
Recording monitor
Playback equipment 1
to video/audio output
to video/audio input
Recording VTR
toSOURCEIN1
Y
Y G
1 Y Y toouTPUT
e| S006
6| locos
to SOURCE IN 2
Playback equipment 2
Caution
Be sure to put the recording VCR into pause mode when
changing the input selection, otherwise the recorded picture
may be distorted.
Take the same precaution even when the
screen is faded or wiped out.
The arrow ( ==)
indicates the direction of signal flow.
17