Management Mode Migration - Cisco Catalyst Wireless 9163E Manual

Management Mode Migration

LED Message
Type
Boot loader
warnings
Cisco IOS Errors
Management Mode Migration
CW9163E AP supports both Cisco Controller and Meraki cloud architecture. You can switch between on-prem
controller and cloud deployments, depending on your requirements.
You can configure the management mode migration with the help of CLI commands in the privileged EXEC
mode, at the AP level, and from the controller GUI. The below table provides the links to the respective
migration procedures.
Migrating the AP from Cisco controller to Meraki
Management mode
Migrating the AP from Meraki Management mode to Cisco
controller
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
42
Color
Solid Red
Cycle through Blue, Green,
Red and Off
Meaning
Image recovery (the Reset button has been pushed for 20-30
seconds)
General warning
Insufficient inline power
Cisco Management Migration
Cisco Catalyst Center Management Migration
Meraki Management Migration
Deploying the Access Point