Tightening Torques; General Tightening Torque Specifications - Yamaha YZ 2018 Series Owner's Service Manual

EAS20320

TIGHTENING TORQUES

EASB29B057
GENERAL TIGHTENING TORQUE SPECIFI-
CATIONS
This chart specifies tightening torques for stan-
dard fasteners with a standard ISO thread
pitch. Tightening torque specifications for spe-
cial components or assemblies are provided for
each chapter of this manual. To avoid warpage,
tighten multi-fastener assemblies in a criss-
cross pattern and progressive stages until the
specified tightening torque is reached. Unless
otherwise specified, tightening torque specifi-
cations require clean, dry threads. Compo-
nents should be at room temperature.
A. Distance between flats
B. Outside thread diameter
General tightening
B
A (nut)
(bolt)
N·m
10 mm 6 mm 6
12 mm 8 mm 15
14 mm 10 mm 30
17 mm 12 mm 55
19 mm 14 mm 85
22 mm 16 mm 130
torques
kgf·m lb·ft
0.6 4.4
1.5 11
3.0 22
5.5 41
8.5 63
13 96
2-11
TIGHTENING TORQUES