Sony BRAVIA KDL-40S4100 Operating Instructions Manual page 20

Getting Started
2
Secure the TV to the Stand.
Use the optional hardware listed below (not supplied):
• M6 x 12-18mm anchor bolt (screwed into the TV's Table-Top Stand).
• A screw or similar (attach it to the TV stand).
• Rope or chain (strong enough to support the weight of the TV). Make
sure that there is no excess slack in the rope or chain.
An alternative way to secure the TV is with an optional Sony Support Belt Kit.
Anchorbolt_ J
Table-Top Stand
3
Anchor the TV to the Wall.
Use the hardware listed below (not supplied).
• Two M6 x 12-18mm anchor bolts (screw into the top-most wall-
mount holes located on the rear of the TV).
• Rope or chain (attach to one M6 anchor bolt).
• Wall-anchor (attach to the wall stud) strong enough to support the
weight of the TV (pass the rope through the wall-anchor, then attach
to the other M6 anchor bolt).
h ola22 oo0t
Anchor bolts -- Rope or
........... W all-anchor
20