Advertisement
1. Tensioner screw
2. Tensioner housing
Installing the Cover
Drilling the Frame Plate
1.
Align the template to the frame plate so that the
edge of the template aligns with the opening in
the plate
(Figure
1. Opening (frame plate)
2. Edge (template)
2.
Clamp the template to the frame plate
Figure 2
3. Lock collar (tensioner
screw)
3).
Figure 3
3. Frame plate
4. Template
(Figure
3.
Mark the holes in the template onto the frame
plate
(Figure
4.
Remove the clamps and template, and
centerpunch the marks on the frame plate that
g270677
you made in step 3.
5.
Using a drill with a 7 mm (9/32 inch) drill bit, drill
the frame plate at the 3 center-punch marks
(Figure
5).
1. 7 mm (9/32 inch) drill bit
g270673
4).
2
Figure 4
4).
Figure 5
g270676
g270675
Advertisement
