Download Print this page

Installation Of Options - Sharp ER-1911S Installation Manual

Advertisement

INSTALLATION MANUAL FOR OPTION
1. LIST OF OPTION (Sales route options)
1) For ER-1911S
3 |Key top kit
ER-11KT6
ER-12KT6
ER-22KT6
ER-11DK6
ER-51DK6
2) For ER-2386S
2 | Key top kit
2. LIST OF OPTIONS (Service route options)
1) For ER-1911S
1x 1 key top
1 x 2 key top
2 x 2 key top
1x 1 dummy key
1 x 5 dummy key
Model name
ER-55CC2
ER-11KT6
ER-12KT6
ER-22KT6
ER-11DK6
ER-51DK6
1x 1 key top
1 x 2 key top
2 x 2 key top
1 x 1 dummy key
1 x 5 dummy key
No.
Parts code
Drawer fixing kit | DKIT8633RC2Z2Z
ER-1911S the bottom
2 | Shield plate kit
DKIT-3381RCZZ
dat
cabinet kit is required
SRV key
LKGIM7113RCZZ
OP key grip cover|LKGIM7126RCZZ |
pee Sub master key
|LKGIM7129RC2ZZ
Re
Drawer bell kit
[DKIT-8324RCZZ
|
2) For ER-2386S
RV key
LKGIM7113RCZZ
OP key grip cover | LKGIM7126RCZZ
3. INSTALLATION OF OPTIONS
3-1.
Drawer fixing kit
The drawer fixing kit is used for securing the cash drawer when
installing separately from the ECR main unit.
|
|
By using two of brackets, the drawer box can be protected from moving
especially when it is filled with coins.
ER-1911S
1) Parts list
KIT CODE: DKIT-8633RCZZ
[No] Paris code [Description
[Price rank [Oy
| 1 | LBRC-2321RCZZ | Fixing bracket
es
en XTPSD40P 16000 | Tapping screw M4 x 16
| AA
| 4
'
g
AA
Flat head screw M4 x 16
.
,
Flat head screw M4 x 20
(For standard drawer)
[6 [XNESD4G-82000
[NatMaxo2
AA
2) Installation procedure
@
Turn over the drawer bottom side and remove rubber footing at
two locations.
@
Fasten the bracket together with the rubber footing using the
pan head screw.
|
Pay attention for the installing direction of the bracket that the
pan head screw can be inserted properly into the bracket.
|
Pan head screw
y
Fixing bracket
Rubber footing
Cash drawer
Pan head screw
LLL
Fixing bracket
Rubber footing
AUNT
= VTL.
Drawer bottom plate
LLL
Fig.3-1
® Fastening on the table:
Secure the fixing Bracket using the screw (Fig. 3-2).
If the thickness of the table is less than 15mm, bore a 4.5mm hole
in the table and fasten it with the screw (XBPSD40P22000 - 4pcs.)
and nut (XNESD40-32000 - 4pcs.)
eo Tapping screw
Fixing bracket

Advertisement

loading

This manual is also suitable for:

Er-2386s