Operation Of Remote Control Unit; Remove The Cover; Operation Procedure - Kenwood MIDl M-85 Instruction Manual

Operation of remote control unit
M Loading batteries
1 Remove the cover.
co os
GSEs |
Insert two AAA-size (RO3/UM-
4) batteries as indicated by
the polarity marking.
@ Operation procedure
Plug the power cord of the system into an AC wail outlet, C3 Rethote-Bontral ightisensae
and press the
key on the remote control unit to
on the main avstern
turn the power on.
When the power is turned on, press the key of the source
component to be operated.
Approx. 6m
@ When two operation keys on the remote control unit are
pressed successively, press each key securely reserving an
interval of more than 1 second for each press.
@ Components connected via the system control cords, such
as the CD player, can also be remote-controlled. In this case,
please read the instruction manual supplied with your CD Operating range
player.
Remote 'control unit
Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. [n
such a case, change the system installation position to prevent the malfunction.
12 -85/m-959 (En)