Sony XM-3040 Operating Instructions Manual page 6

| the corresponding speaker terminals
Rear
Front
Car stereo
Remote control lead
Channel switch (4 ch)
Front
speakers
SPEAKER OUT
@——A-—-0 (2ch)o —c—---©
®AO OBO(3ch}o—c—O
GAO OBO(Ach\OCe ODO
Rear
speakers
To a metal point
of the car
at least 30A)
12 V car battery
Notes on the 4 or 3-speaker connection
¢ Set the channel switch to 4 ch on the 4-speaker
connection and to 3 ch on the 3-speaker connection
¢ On the 3-speaker connection, use only the A, B, C
input jacks and connect the speaker cords to the
@-A-© O-B-© (3 ch) @-C—O
marked terminals as shown above
¢ Make sure to connect the remote contro! lead of the
car stereo to the REMOTE terminal
e Use the power connecting cord with the fuse
attached (at least 30 A).
6)
You can also make a 4-speaker connection with
two channel inputs
Use the A. C input jacks and set the channel switch to
4 ch. The result is that the input to the A jacks is output
from the A, B terminals and the input to the C jacks is
output from the C, D jacks.