Enviromental Information - Philips AJ301DB User Manual

REPEAT ALARM
This repeats your alarm call at 9 minute intervals.
• During the alarm call, press REPEAT ALARM /
™ Display shows ALM1 or ALM2 flashing during a repeat alarm.
• Repeat if desired (up to a maximum of 6 times).
CANCELING THE ALARM COMPLETELY
• Press ALM 1 or ALM 2 button once or more until ALM1 or ALM2 disappears.
DOCK (See 4)
By connecting the iPod to your AJ301DB, you can listen to the sound of the
docked player through the powerful speakers of the Hi-Fi system.
COMPATIBLE PORTABLE PLAYER
• Apple iPod models with 30-pin dock connector as follows:
Nano 1st /2nd/3rd generation, iPod 5th generation (video), iPod touch and
iPod classic.
DOCK ADAPTERS
Before plugging your player in the dock, snap the suitable dock adaptor into the
dock to provide a snug fit for the player to be docked.
Selecting the correct dock adaptor
• 4 iPod dock adaptors are included. Each adaptor has indication to match
different iPod types.
PLAYING APPLE iPod USING AJ301DB
1 Snap the compatible iPod into the dock connector.
2 Press DOCK to switch on the dock mode.
3 The connected player will play automatically.
Notes:
– In dock mode, if no player is docked for 15 minutes, AJ301DB will come to standby.
– By using the buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ301DB and its
remote control, the following iPod playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ301DB and its remote con-
trol can work only with playback of the audio contents stored on the docked player.
.
BRIGHTNESS CONTROL
CHARGING iPod BATTERY USING THE DOCK
Docking your iPod to AJ301DB, you can charge the iPod in the standby mode and
power-on mode of AJ301DB.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are five sleep time options.
Setting and switching off SLEEP
1 In the active mode, set your timer by pressing SLEEP repeatedly until the desired
timer option appears.
™ Selections are follows (time in minute):
120=90=60=30=15=OFF=120
2 The set will turn off automatically at the selected time.
3 To cancel sleep, press either:
– POWER
– SLEEP once or more until SLEEP disappears from the display.
Reset
Should your set receive external interference e.g. static electricity from carpets, thun-
derstorms, etc. RESET allows you to clear all previous settings and start up again.
• Use a ballpoint pen to press the RESET hole found on the bottom of the set.

ENVIROMENTAL INFORMATION

All unnecessary packaging material has been omitted. The packaging can be
easily separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disas-
sembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging, dead batteries
and old equipment.