Charge Mobile Phone; Charge The Ni-Mh Battery Pack - Philips AE1120 User Manual

Charge mobile phone

This portable radio can also serve as an
emergency charger for your mobile phone.
In places where AC outlet is unavailable, your
phone will never run out of power with this
device.
1
Open the MICRO USB cover and take out
the supplied USB cable.
2
Plug the USB cable into a USB socket on
your phone. (Fig.
g
3
Slide the power source selector to
CHARGE MOBILE. (Fig.
h
4
Pull out the POWER GENERATOR, then
rotate it quickly to charge your phone.
(Fig. )
)
)
i
» The charing indication appears on your
phone.
Note
•
If the supplied USB cable does not match the USB
socket on your phone, plug it into a USB convertor
(not supplied) first, and then connect to your phone.
•
For some mobile phones that have special
requirements on the charging current or voltage,
charging may be unsuccessful.
Charge the Ni-MH battery
pack
You have two ways to charge the built-in Ni-
MH battery pack.
Charge through USB socket
1
Slide the power source selector to OFF,
BATT, or RECHARGE BATT.
2
Connect a USB cable (not supplied) to :
• the USB socket of your computer.
• the USB socket of the portable radio.
(Fig. )
EN
6