Preparation For Wall Mounting The Kdl-32S2400 - Sony BRAVIA KDL-32S2400 Operating Instructions Manual

Other Information
Preparation for Wall Mounting the KDL-32S2400
This TV can be installed on a wall by using a wall-mount bracket (sold
separately). Before mounting the TV on a wall, the Table-Top Stand must be
removed fl:om tile TV.
Sony Wall-Mount
Bracket Model
SU-WL31
(KDL-32$2400)
Follow tile simple steps below to remove tile Table-Top Stand:
1 Disconnect all the cables from tile TV.
Cover a level and stable surface with a thick and soft cloth.
2
3
Gently lay the TV. face down, onto the cloth. Make sure the Table-Top
Stand is banging over the edge.
4 Rotate the cable holder 90 degrees, and pull it out completely. [See
illustration AI
5 Remove the screws and detach the Table-Top Stand from the TV. [See
illustration B] Be sure to hold the Table-Top Stand firmly while
removing the last screw.
6 Do not remove any other screws fiom the TV.
For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in
installing this TV. especially to determine the strength of the wall for
withstanding the TV's weight. For product protection and safety reasons,
Sony strongly recommends that you use the Wall-Mount Bracket model
designed for your TV and the wall-mounting of your TV should be
performed by Sony dealers or licensed contractors.
Cable holder
o
o
Soft cloth Table-Top Stand
43