Advertisement
AC Adapter
CR-M10
* The appearance of the
actual AC adaptor differs
from that shown in the
illustration.
Hardware Manual
2. Using the AC-S10K
Important!
Using the AC adapter for long periods can cause it to become
warm to the touch. This is normal and does not indicate
malfunction.
Always make sure that A-10/A-11 power is turned off
whenever attaching the AC adapter or charger to the
CR-M10.
Whenever connecting the RS-232C cable to a desktop
computer, make sure that the desktop computer is turned off.
¢ Do not twist or rotate the CR-M10 or A-10/A-11 when
attaching or detaching them. Doing so can damage connec-
tors.
Using the CR-M10 and AC Adapter
Important!
In order to protect memory contents, the unit will not start up
while the AC adapter is connected if batteries are dead.
Connect the AC adapter, CR-M10, and A-10/A-11 as shown in
the illustration.
Connected to desktop computer
Connector unlock button
Press when disconnecting the
CR-M10 from the A-10/A-11
A-10/A-11
AC adapter
CR-M10
. With dry cell batteries
loaded,
e¢ The CR-M10 automatically locks when attached to the
A-10/A-11.
Important!
e If a rechargeable battery pack is loaded in the A-10/A-11,
this configuration does not provide power for charging the
battery pack.
Using the CR-M10 and Charger
Important!
The CR-M10 makes it possible to use the RS-232C connector
while charging the battery pack. Connect the AC adapter,
charger, CR-M10 and A-10/A-11 as shown in the illustration.
The charger and RS-232C cable automatically lock when
inserted into the CR-M10.
Connected to desktop computer
Connector unlock button
Press when disconnecting the
CR-M10 from the A-10/A-11
CHS50150
A-10/A-11
AC adapter
Charger
Charge indicator
(lights while a charge
operation is in progress.)
With rechargeable
battery pack loaded,
e The CR-M10 automatically locks when attached to the
A-10/A-11.
e The charge indicator lights when the charge operation starts.
e It takes approximately 10 hours to achieve a full charge.
e You can use the A-10/A-11 while the battery pack is charg-
ing.
e Connecting the charger while dry cell batteries are loaded in
the A-10/A-11 provides power from the AC adapter, without
charging the dry cell batteries.
e Never attach both the AC adapter and the charger to the
CR-M10 at the same time.
3. Specifications
AC Adapter: SA-051A5F-7
Power Consumption:
«..
5.6W when used to power the A-10/A-11
6.8W when used to power the charger
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions (excluding projections)
40.5 H x 49.0 W x 74.0 D mm (1'/s"H x 17/s"W x 275"D)
Weight: 185 g (6.5 0z)
CR-M10
Advertisement
