Scene Button; In Case Of Difficulty - Kenwood DPC-92 Instruction Manual

@ SCENE Button
Pressing the SCENE button will display the operation sequence shown below.
NORMAL <> HOME <> HEADPHONE => CRUISING —> NORMAL
a 0
Natural, unprocessed sound.
Wide and generous sound for listening to music indoors.
NORMAL:
HOME:
HEADPHONE: Sound which avoids unnatural noise arising from using headphones.
CRUISING:
environment.
To reduce the level difference between high and low levels for listening in a noisy
@ When set to the CRUISING position, the [GENRE] setting will return to NORMAL.
@ When set to [GENRE] while in the CRUISING position, the CRUISING function will be canceled
and return to NORMAL.
@ When the [HIT MASTER] function is entered, GENRE and SCENE circuits will both return to
NORMAL.
In case of difficulty
What appears to be a malfunction may not always be serious. Firstly, check the following items
before consulting the service personnel.
Symptom
Cause
Remedy
No operation occurs when
an operation button is
pressed.
The HOLD switch is set to HOLD.
The power is set to OFF
The disc is placed upside down.
Dew is condensed inside the unit
(refer to page 7).
The AC adaptor is unplugged.
The batteries are exhausted.
The headphone plug is dirty
Set the HOLD switch to OFF.
Press the PLAY/PAUSE button to
turn power ON.
Place the disc with the label side
facing up.
Turn power OFF and wait for
about an hour before operating
the unit again.
Plug it properly.
Replace the alkaline dry batteries,
or recharge the rechargeable bat-
teries.
Clean the plug.
Sound is not produced
from the headphones.
The headphones plug is not insert-
ed securely in the PHONES jack.
The VOLUME control is set to a
too low position.
Insert securely into the PHONES
jack.
Increase the volume to a suitable
level that does not annoy other
people.
Sound skips.
The laser tens is dirty.
The disc is dirty.
The unit is placed in a place sub-
ject to strong vibration of the car.
Clean the lens.
Clean the disc.
Place it on the place less subject
to vibrations, such as on the seat.
@ Abnormal operation may sometimes occur when the batteries are exhausted. In such acase,
turn the power OFF (by pressing the stop button twice), and replace the alkaline dry batteries
or recharge the rechargeable batteries.
ppc-92 21
m
z
a
eg
n"
=z