Pioneer GR-555 Operating Instructions Manual
Hide thumbs Also See for GR-555:

Advertisement

Quick Links

Operating
Instructions
GRAPHIC
EQUALIZER
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
R-555
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your securi-
ty.
[For Canadian model]
CAUTION:
to prevent Etectaic SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenin Les cHocs ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
Connection
I
Connection II
Signa! path diagram
Rear Panel Facilities
Front Panel Facilities
Using the Equalizer Controls
CONT ENTS
LINE VOLTAGE
SELECTOR
SWITCH
Only
multi-voltage
models
are provided
with
this
switch. U.S., Canadian,
European, U.K., and Austra-
lian models are not provided with this switch,
Mains voltages
in Saudi Arabia are 127V and 220V
only.
Never
use
this model
with
110V
setting
in
Saudi Arabia.
You will find the line voltage selector switch on the rear pan-
el. Before your model its shipped from the factory, the switch
is set to the power requirements of the destination; neverthe-
less, you should check that it is set properly before plugging
the power cord into the AC outlet. If the voltage is not properly
set, or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows. Before adjust-
ing, disconnect the power cord.
1, Use a medium-size screwdriver.
2. Insert
the screwdriver
into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow
VOLTAGE SELECTOR
Medium-size
screwdriver
@ PIONEER'
The Art of Entertainment

Advertisement

Table of Contents
loading

Table of Contents