Specifications - Sony LMD-2110MD Instructions For Use Manual

Specifications

Picture performance
LCD panel a-Si TFT Active Matrix
Picture size 21.5 type
477 × 268, 547 mm
(W/H, Diagonal)
7
(18 /
Resolution 1920 × 1080 dots
Viewing angle (LCD panel specifications)
(up/down/left/right, contrast > 10:1)
80°/80°/85°/85° (typical)
Scan Normal 0%
Over 5%
Aspect 16:9
Display color 16 770 000
Input/output connectors
Input
LINE input connectors
Y/C input 4-pin mini-DIN (1)
VIDEO input
BNC type (1), 1 Vp-p ±3 dB, negative
synchronization
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
RGB/COMPONENT input connectors
BNC type (3)
RGB input 0.7 Vp-p ±3 dB, (Sync On Green,
0.3 Vp-p negative sync.)
Component input
0.7 Vp-p ±3 dB, (75% chrominance
standard color bar signal)
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
OPTION IN connector
D-sub 9-pin (1), female
OPTION AUDIO IN connector
Phono jack (1), –5 dBu 47 kilohms or
higher
External synchronized input connector
BNC type (1), 0.3 Vp-p to 4.0 Vp-p ±
bipolarity ternary or negative
polarity binary
HDMI IN connector
HDMI (1)
PARALLEL REMOTE input connector
Parallel remote
Modular connector 8-pin (1)
5 5
× 10 / , 21 / inches)
8 8 8
Output
LINE output connectors
Y/C output 4-pin mini-DIN (1), Loop-through,
with 75 ohms automatic terminal
function
VIDEO output
BNC type (1), Loop-through, with
75 ohms automatic terminal
function
AUDIO output
Phono jack (1), Loop-through
RGB/COMPONENT output connectors
RGB/Component output
BNC type (3), Loop-through, with
75 ohms automatic terminal
function
AUDIO output
Phono jack (1), Loop-through
External synchronized output connector
BNC type (1), Loop-through, with
75 ohms automatic terminal
function
Built-in speaker output
0.5 W (mono)
General
Power AC 100 V to 240 V, 50/60 Hz
Power consumption
Maximum: approx. 69 W
Input Current 1.3 A to 0.6 A
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation allowed)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (2)
Before Using This Unit (1)
CD-ROM (including the Instructions
for Use) (1)
Service Contact List (1)
Information for Customers in Europe
(1)
Optional accessories
HD/SD-SDI Input Adaptor
BKM-341HS
29