Connecting To A General Midi Keyboard - Casio FD-1 User Manual

Connecting to a General MIDI Key-
board (CTK-631, WK-1200, WK-1300,
etc.)
Setting Up the FD-1
In adclition to the following settings, also see the set-
tings under "Making Function Settings" on page E-19.
To specify the key count
I} Press the FUNCTION button.
Use the SELECT buttons to display the key count
setting screen.
.». Use the VALUE buttons to specify the key count.
Example: Specify "61" as the key count when connect-
ing to the CTK-631.
I Ok 233)
UO UUUU T O
+
Hic TAA
6 (Reus.
To match navigate channels
i. Press the FUNCTION button.
Use the SELECT buttons to display the navigate
channel setting screen.
avi th
'. Use the VALUE buttons to select channel 1.
E-14
Keyboard Settings
The following shows settings you need to make on
the keyboard to which you are connecting. See the
documentation that comes with the keyboard for full
details.
® Set the MODE switch to "Normal".
* Turn off layer and split.
* Display the tone setting screen.
¢ Turn aff Free Session.
HNOTES!
Setting the mixer current channel of the connected keyboard
to 1 makes it possible to monitor the lesson part on the key-
board's graphical keyboard and staff display.
To stop the next note from sounding when using the lesson
function, lurn off the FD-1 key flash (page E-21)}.
When playing a part that includes very high or very low octave
tones, such as bass ar piccolo, the note produced when you
play the keyboard may sound tn a differant octave.
FDI-E-016A