Battery Charging State Indicator (While Charging); Battery Charging State Indicator (While In Use); Using The Supplied Accessories; Accessories Holder For The Suction Tube - Miele HS23 Operating Instructions Manual

en
 Plug the charger into the power
socket.
The charging process will start.
Battery charging state indicator
(while charging) (Fig. 17)
The battery charging state is displayed
on the top of the PowerUnit.
Charging capa-
city
Minimum char-
ging capacity
Increasing char-
ging capacity
Charging capacity
increasing further
Charged capacity
approx. 91–99 %
100 %
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
If the battery has not been used for a
long time and has run down, it will
switch to safe mode. As a result, the
battery charging state indicator will
only respond after approximately 30–
60 minutes.
Battery charging state indicator
(while in use) (Fig. 17)
The battery charging state is displayed
on the top of the PowerUnit.
52
Display
Left indicator
lights up
Left indicator
lights up; middle
light flashes
Left and middle
indicators light up;
right indicator
flashes
Left, middle and
right indicators
light up
Switches off
Charging capacity
Maximum charging
capacity
Decreasing char-
ging capacity
Charging capacity
decreasing further
Minimum charging
capacity

Using the supplied accessories

(Fig. 18)
Miele offers a range of suitable ac-
cessories for many special applica-
tions (see "Optional accessories").
 Dusting brush
Accessory for vacuuming skirting
boards, carved furniture or orna-
ments.
 Crevice nozzle
Accessory for cleaning in folds,
crevices or corners.
 Upholstery nozzle
Accessory for cleaning upholstery,
mattresses and cushions.
Accessories holder for the suction
tube (Fig. 19)
This accessories holder allows you to
carry around 2 accessories from the
three-piece accessory set while you va-
cuum.
Display
All indicators
light up
Two indicators
light up
One indicator
lights up
One indicator
flashes