Table Of Contents - Philips 60P834199 Directions For Use Manual

Table of Contents

Advertisement

G
S
Welcome/Product Registration . . . . . . . . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
O
-S
F
N
CREEN
EATURES
Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . .6
Reduction (DNR) Control . . . . . . . . . . . . . . . . . .7
Turning on the ImageMax Control . . . . . . . . . . . .8
The Convergence Control:
• Converge Red/Blue . . . . . . . . . . . . . . . . . . . .9
• Undo Multipoint . . . . . . . . . . . . . . . . . . . . .12
• Setting the Clock . . . . . . . . . . . . . . . . . . . . .13
• Setting the Start Time . . . . . . . . . . . . . . . . .14
• Setting the Stop Time . . . . . . . . . . . . . . . . .15
• Selecting the Channel . . . . . . . . . . . . . . . . .16
• Selecting the Tuner . . . . . . . . . . . . . . . . . . .17
• Setting the Activate Control . . . . . . . . . . . .18
the Time on Screen . . . . . . . . . . . . . . . . . .19
The AutoLock Control:
• Understanding AutoLock . . . . . . . . . . . . . . .20
• Setting up the Access Code . . . . . . . . . . . . .21
• Blocking Channels . . . . . . . . . . . . . . . . . . .22
• Blocking by Movie Rating . . . . . . . . . . . . .23
• Blocking by TV Rating . . . . . . . . . . . . . . . .24
• Turning the Blocking Control
on or off . . . . . . . . . . . . . . . . . . . . . . . . . .25
• Blocking Unrated Broadcasts . . . . . . . . . . .26
That Have No Rating . . . . . . . . . . . . . . . .27
• Reviewing Your Settings . . . . . . . . . . . . . . .28
• Clearing All Blocked Channels . . . . . . . . . .29
NOTE: This owner's manual is used with several different tele-
vision models. Not all features (and illustrations) discussed here-
in will necessarily match your television set. This is normal and
does not require that you contact your dealer or request service.
Because of continuous product improvements, the information
mentioned in the documents accompanying your product are
subject to change without notice.
T
C
ABLE OF
ONTENTS
and Balance . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Incredible Surround . . . . . . . . . . . . . . . . .33
Setting the TV for Stereo and SAP . . . . . . . . . . .34
Setting the Audio Out Control . . . . . . . . . . . . . . .35
and Audio Outputs . . . . . . . . . . . . . . . . . . . . . .36
Using the Bass Boost Control . . . . . . . . . . . . . . .37
Using AutoPicture . . . . . . . . . . . . . . . . . . . . . . . .38
Using AutoSound . . . . . . . . . . . . . . . . . . . . . . . .39
and Program List . . . . . . . . . . . . . . . . . . . . . . .40
Using the Sleep Timer Control . . . . . . . . . . . . . .41
Using the Volume Buttons . . . . . . . . . . . . . . . . . .42
Using the AV Button . . . . . . . . . . . . . . . . . . . . . .43
Accessory Devices . . . . . . . . . . . . . . . . . . .44-48
T
HE
Using PIP (Basic Connections) . . . . . . . . . . . . . .49
Selecting the PIP Signal Source . . . . . . . . . . . . . .50
Using Connection Options . . . . . . . . . . . . . . .53-54
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Glossary of Television Terms . . . . . . . . . . . . . . .56
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . 60
Refer to the simple Setup and Quick Use Guide
(supplied with your TV) for details on the
following:
• Basic TV Connections
• Television and Remote Operation
• On-screen Menu Controls
• How to Use the Installation Features
• Connection Options for Accessory Devices
AutoLock, AutoPicture, AutoSound, ImageMax, and Incredible Surround are trademarks
of Philips Consumer Electronics Company. Copyright © 2001 Philips Consumer
Electronics Company. All rights reserved.
4
-
S
Q
ETUP AND
UICK
(PIP) F
EATURE
U
G
SE
UIDE
Setup and Quick Use Guide
Setup and Quick Use Guide
Projection
Projection
Television
Television
T
C
IMPORTANT
ABLE OF
ONTENTS
NOTE: This owner's manual is used with several differ-
ent television models. Not all features (and drawings) dis-
Getting Started
cussed in this manual will necessarily match those found
with your television set. This is normal and does not
Warning/Important Notice . . . . . . . . . .1
On-screen Menu Controls . . . . . . . . . . . . . . . . .4
require that you contact your dealer or request service.
Basic TV Connections . . . . . . . . . . .1-2
How to Use the Installation Features . . . . . . .5-7
WARNING: TO PREVENT FIRE OR SHOCK HAZ-
Television and Remote Control Operation . . .2-3
Connection Options for Accessory Devices . .7-8
ARD DO NOT EXPOSE THIS UNIT TO RAIN OR
EXCESSIVE MOISTURE.
AutoChron, AutoPicture, AutoSound, and Incredible Surround are trademarks of Philips Consumer Electronics Company. Copyright © 2001 Philips
Consumer Electronics Company. All rights reserved.
B
ASIC
TV C
ONNECTIONS
A
NTENNA OR
S
Connect two lengths of
Connect one of the RF
MART
C
TV
Connect a cable TV
H
ABLE
RF coaxial cable to the two
coaxial cables coming from
ELP
signal to a 75-ohm two-way
output plugs on the two-way
two-way signal splitter to the
signal splitter (an optional
You can treat the
See the next page for details
signal splitter. The two lengths
PIP ANT(enna) "B" input on
accessory).
output connection of a satel-
on connecting a cable con-
of RF coaxial cable must have
the back of the TV and the
lite receiver as you would a
verter box.
Or
F-type connectors (screw-on or
other RF coaxial cable to the
standard antenna or cable TV
push type) on their ends.
ANT(enna) "A" input on the
A
NTENNA
A
AND
B I
NPUTS
Connect an outdoor or
signal, except the satellite
indoor antenna signal to the
back of the TV.
signal should not be split as
Y
our TV has two separate
75-ohm two-way signal split-
shown in the illustration to
ANT(enna)/cable inputs
ter. If your antenna has flat
the right. The satellite signal
should go directly into the
on the back of the set. These
twin-lead wire (300 ohm), you
ANT(enna) "A" input con-
two signal inputs offer conven-
must first attach the antenna
nection on the back of the
ient hookup options for both
wires to the screws on a 300-
TV. Then, if you would like,
normal TV program viewing
to 75-ohm adapter before con-
use the PIP ANT(enna) "B"
and Picture-In-Picture (PIP)
necting to the two-way signal
input connection for either
features.
splitter.
an outdoor/indoor antenna or
Back of TV
The ANT(enna) "A" input is
cable TV signal. Refer to the
intended for use and viewing
owner's manual for the satel-
on the TV's main screen. Your
lite box to get further infor-
home's primary antenna or
mation on connections.
cable TV signal should be con-
Run Auto Program to store
nected to this input for normal
in the TV's memory only the
TV setup, use, and feature
channels with active broad-
operation.
cast stations. See page 5 for
The PIP ANT(enna) "B"
Cable TV Signal
Cable TV
details.
input is a second, or auxiliary,
Company
signal source included for your
TV's Picture-In-Picture (PIP)
RF Coaxial
feature. For many homes, the
Cable
use of a single existing anten-
75 (Ohm)
PIP ANT(enna)
na or cable TV source for both
"B" Input
ANT(enna)"A" and PIP
2
ANT(enna) "B" will be the
preferred method of connection
(see illustration to the right).
OR
1
This type of connection
RF
3
(optional signal splitter
Coaxial
required) will work properly
Cables
for the TV's main on-screen
features, as well as retain all
(The Two-way Signal Splitter
the features designed for PIP.
has a single 75-ohm input and
branches to twin 75-ohm outputs.
For more details on PIP, refer
RF coaxial connecting cables will
to pages 49-52 in the
be needed for use with the Two-
ANT(enna)
Directions for Use manual that
300 (Ohm) to
way Signal Splitter.)
"A" Input
75 (Ohm)
came with your set.
Adapter
S
MART
Twin-lead Wire
Outdoor or Indoor Antenna
H
ELP
(Combination VHF/UHF)
Receives normal broadcast channels
Contact your dealer,
OR
2-13 (VHF) and 14-69 (UHF).
or our Parts Information
Center at 1-800-851-8885 to
RF Coaxial Cable
order the following acces-
75 (Ohm)
sories: two-way signal split-
ter, RF coaxial cable, 300-
ohm to 75-ohm adapter,
NOTE: Proper operation of your TV is not dependent upon the connection of the PIP ANT(enna) "B" input. The main purpose of the
combination VHF/UHF
input is to provide an easily connected, dedicated picture source for the PIP feature. You can, however, use the PIP ANT(enna) "B" input to
antenna.
connect and display other signal sources such as an outdoor or indoor antenna or a video game player.
Although the PIP ANT(enna) "B" input can be used and swapped as the source for the TV's main picture, certain setup features (such
as AutoChron) are based only on your TV's detecting a signal at the ANT(enna) "A" input. To ensure that all features are operating proper-
ly, you may not want to rely solely on the PIP ANT(enna) "B" input as your TV's main screen signal source.
1
3135 035 20251

Advertisement

Table of Contents
loading

Table of Contents