SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual
4.4 Installing the Mounting Bracket
Installation Precautions
Figure 4-7
Figure 4-7 Mounting bracket dimensions
Before installing the mounting bracket, remove the security torx wrench from the
mounting bracket and set it aside.
Issue 19 (2023-12-20)
Figure 4-6 Stacked installation mode (not recommended)
shows the inverter mounting bracket dimensions.
NO TE
The inverter mounting bracket has four groups of tapped holes, each group containing four
tapped holes. Mark any hole in each group based on site requirements and mark four holes
in total. The two round holes are recommended.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
34