Advertisement
2.
Open the back cover.
3.
Attach the Communication Module to the unit by plug-
ging the module into the mating connectors on the back
of the unit.
Caution: Be sure to properly align pins in the dual
connector upon insertion to avoid damage to the
card or the QuickPanel View unit.
4.
Install the three screws to secure the card in the unit.
5.
Close the cover.
Note:
To use this card with QuickPanel View, CIMPLICITY Machine
Edition software is required. The Slave card is supported only in
QuickPanel View.
GFK-2291B
PROFIBUS Slave Adapter
Installation
7
Advertisement
