Wall Mounting An 8-Port Video Appliance - Motorola Avigilon 3 Series User Manual

Wall Mounting an 8-Port Video Appliance

You can mount the 8-port Video Appliance to a wall. This can be useful if you want to install the appliance in
a location obscured from view, such as a closet or equipment room, or so that it doesn't take up shelf or
counter space. A pair of wall mount brackets with drywall screws and anchors are provided with the
appliance. If you are mounting the appliance in a wooden cabinet, or a brick or concrete wall, you will need
to obtain the appropriate screws.
Tip: Install the wall mount brackets to the appliance and the wall before you permanently power on
the appliance, connect cameras to it, and start recording. If you want to set up your appliance
before mounting it to the wall, we recommend you turn off the power supply to the appliance and
disconnect all cables after set up is complete and before you mount the appliance to the wall.
CAUTION — The device must be mounted as instructed or any issues that arise will not be covered
by the warranty.
To mount the appliance on a wall:
Figure 3:
Mounting the 8-port Video Appliance to a wall
1. Attach the wall mount brackets to the lowest threaded holes on the sides of the 8-port Video
Appliance.
2. Position the appliance with the rear panel facing downwards. Ensure that the airflow through the
appliance is not blocked when it is in position.
3. Mark the locations of the screw holes on the wall.
4. Drill holes for the anchors and insert the anchors into the wall. If you are using wood, concrete or
masonry screws, drill holes as appropriate.
5. Attach the appliance to the wall.
Wall Mounting an 8-Port Video Appliance 7