Playing Tracks In The Desired Order (Program Play); Playing Tracks Repeatedly (Repeat Play) - Sony MHC-W77AV Operating Instructions Manual

.
|
Playing Tracks in the
Desired Order
(program play)
You can make a program of up to
32 tracks trom all the CDs in the order you
want them to be played.
SYSTEM
POWER > ON
DISPLAY
NB ©
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Place the CDs on the disc tray.
3 Press PLAY MODE repeatedly until
"PROGRAM" and "DISC" appear in the
display.
| '>4
ays
4 Press DISC 1-3 to choose a CD.
.
5 Turn the JOG dial to choose a track.
The track number and the total playing
time appear.
Track number
Total playing time
6 Press ENTER/NEXT.
The chosen track number lights up inthe
music calendar. If the track number
disappears before you press
ENTER/NEXT, go back to step 5.
7 Repeat steps 5 and 6 to program
additional tracks from same CD.
Repeat steps 4 to 6 to program
additional tracks from another CD.
8 Press [> Wf.
All the tracks play in the order you
choose.
To Press
Check the CHECK on the remote
program repeatedly"!
Programa pause lon the remote**
Stop play ||
Cancel program PLAY MODE*
play repeatedly until
"PROGRAM" or
"SHUFFLE" disappear.
CLEAR on the remote in
stop mode
Erase a specific | CHECK on the remote
track repeatedly so that the
number of the track
lights up, and press
CLEAR on the remote
M@ once in stop mode or
twice while playing
Erase a track
from the end
Erase the entire
program
*' After the last track appeared "CHECK
END" appears in the display.
*= "P" appears and the total playing time is
reset to 0.00.
** The program is erased.
To change the order of
programmed tracks
Erase the entire program and create a new
one.
Notes
¢The program you made remains in the CD
player even after it has been played back.
Press [>I to play the same program
again.
elf "--.--" appears instead of the total
playing time during programming, this
means:
— you have programmed a track number
which exceeds 20.
~ the total playing time has exceeded
100 minutes.
a a
Playing Tracks
Repeatedly
(repeat play)
The repeat play function repeats a single
CD or all CDs in normal play, shuffle play
and prugram play.
Use the buttons on the unit to do this
operation.
SYSTEM
POWER > ON
oe
O10 3
REPEAT
Repeating all the tracks
1 Press REPEAT a few times until
"REPEAT" appears in the display.
2 Press Coil.
To Press
1/ALL DISCS
repeatedly until "1
Repeat all the
tracks on the
current CD DISC" appears in the
display.
Repeat all the 1/ALL DISCS
tracks on all CDs repeatedly until "ALL
DISCS" appears in the
display.
Repeat only one REPEAT repeatedly
track until "REPEAT 1"
appears in the display
while playing the track
you want to repeat.
To cancel repeat play
Press REPEAT so that "REPEAT" or
"REPEAT 1" disappears from the display.
Chapter 2: the CD Player
)