Kit d'antenne interne
Removing the internal antenna kit
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
6. Remove the
disk-drive
7. Remove the
wireless card
About this task
The following image indicates the location of the internal antenna kit and provides a visual representation of the removal
procedure.
Before working inside your
if applicable.
if applicable.
cage.
if applicable.
computer.
Retrait et installation des unités remplaçables sur site (FRU)
81