Advertisement
ding, this switch can be
nd just recorded sound.
1g to the tape used and
OPERATING DISPLAY
I =
=
68.
-35
-28
PEAK HOLD
CO
in init mitt nit nt ttt nin tit vn vin
{ MUTE |
@) Counter
e
The counter has three display modes.
e
When the cassette door is opened, the message ''OPEN"
is displayed.
e
During music search the number of selections is displayed.
(2) TAPE RETURN
Lights up during tape return operation.
3) Tape transport modes
"4
= Lights up when rewinding the tape.
®
~. Lights up during playback, playback pause, recording
pause and recording. Flashes during music search.
»P
— Lights up when fast forwarding the tape.
wa
=: Lights up in the pause mode.
(4) MUTE
Flashes and lights during recording mute operation.
(&) REC
Lights up during recording.
6) Warning zone
Changes according to the type of tape used and to the selected
meter range.
®
Monitor source
TAPE:
Recorded sound
SOURCE:Original source sound
Scale for WIDE range
9) Level
L: Left channel
R: Right channel
The QO mark indicates the reference level for the Dolby NR
system,
REMAIN
Lights up when the remaining time counter mode is selected.
(1) LARGE HUB
Lights up when the TAPE CAPACITY selector is pressed in the
remaining time counter mode, and the Large Hub mode is set.
(12) TIME COUNTER
Lights up in the time counter mode.
(3) DOLBY NR B/C
Indicates the selected Dolby Noise Reduction system, B or C.
0 dB position for EXPAND range
(15) MPX FILTER
Lights up when the MPX FILTER switch is pressed while the
Dolby NR system is ON.
0 dB position for WIDE range
G2) Tape type
The unit will automatically detect and display the tape type
(NORMAL/CrO2/METAL)
of the cassette inserted. When no
tape is inserted, METAL is displayed.
Scale for EXPAND range
@ Connections
Connection of input and output cords
e The cords to be used have white and red pin plugs.
e
Connect white plugs to the left channel (L), and red plugs
to the right channel (R), making sure that the colors match.
Take particular care to insert the plugs all the way in.
-- (Not provided in the European model.) —s
CONTROL
IN jack
Connect this jack to the CONTROL OUT jack of a component
equipped with the Pioneer System Remote Control (bearing
White plug
the
RI mark) using the supplied mini-plug cord, and you
ON
will be able to operate the component using the system
ae;
Right channel
remote control.
Red plug
CONTROL
OUT jack
Intermediary output of remote control signals from the above
input jack. Connect it to the CONTROL IN jack of another
component compatible with the Pioneer System Remote
Control.
Left channel
Connection to an audio timer
For details on the connection to an audio timer, refer to the
instruction manual of the audio timer.
CT-91
Recording connection
Playback connection
Supplied
When
performing
unattended
cords
p
g
recording or wake-up playback
Audio timer
www
wewe
Mustration not applicable to U.K. model.
Household AC outlet
were
eee
eee,
ete
wwons,
i
Stereo amplifier
Advertisement
