Using The Timer Menu - Sony Trinitron KV-27S26 Operating Instructions Manual

®©) Using the TIMER menu
a | TIMER
L— DAYLIGHT SAVING:YES
C TIM RENT TIME SET
FF TIMER
~-- --—-- AM
Exit
After setting the clock you can use the timer to
turn the TV on and off.
For detailed information on using the remote
to modify menu settings, refer to "Learning
menu selection" on page 18.
To select the TIMER © menu:
MENU
©
Tip
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
DAYLIGHT
SAVING
Automatically adjusts
the time.
Spring: Select YES to compensate for Daylight Saving Time.
The current time automatically moves one hour ahead.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour.
CURRENT TIME SET
CURRENT
TIME SET
Necessary for the
TIMER.
CURRENT TIME SET window will appear.
1 Press ¢ or + on the select buttons until the current day
(MON-SUN) is displayed. Press to select.
2 Press ¢ or + on the select buttons until the current
hour (01-12) and AM/PM is displayed. Press to
select.
3 Press # or + on the select buttons until the current
minute (00-59) is displayed. i
4 Press G).
The Clock has now started. Press MENU to exit.
b..
DMENU
Use @ Exit
ON/OFF TIMER
Fiza
===- AM_h CH ___
MENU
ON/OFF TIMER
Wake up or
scheduled viewing.
ON/OFF TIMER window will appear.
1 Press ¢ or + on the select buttons until the desired day
(MON-SUN) or range of days (EVERY Sun-Sat or
EVERY Mon-Fri) is displayed. Press to select.
2 Indicate the time (hours then minutes) that you want
the TV to turn on by pressing # or + and then C=).
3 Set the time duration (maximum of 6 hours) by
pressing # or + and then CG).
TO CANCEL THE TIMER FUNCTION, PRESS RESET.
4 Press ¢ or + on the select buttons to select the desired
channel. Press to select.
The timer is now set. The TIMER indicator on your TV will be lit.
Press MENU to exit. When you perform AUTO PROGRAM, all TIMER settings will be erased.
SUN 12:00 AM
Exit Ba Use WA G
21