Advertisement
Operating
Your Remote
Control
Installing
the batteries
I. Remove the back cover of the remote control by pushing the
tab in the direction of the arrow and sliding off the cover.
2. Load the batteries, making sure the polarities(+)
and (-) are correct.
IMPORTANT
When you replace the batteries in your remote control,
the remote may return to its initial setting. You may
need to set up your remote
again.
@@
For best results
Be within
20 feet of the equipment
when using the remote
control
Don't
press two
or more
buttons
at the same time, unless you
are specifically
instructed
to do so in this owner's guide.
Don't allow the remote
control
to get wet or become
heated.
Avoid dropping
the remote
control
on a hard surface.
When
cleaning the remote
control,
don't
use any harsh chemi-
cals. Use only a soft, slightly
moistened
cloth.
Don't mix new batteries
with old ones.
Don't heat, take apart, or throw
batteries
into a fire.
Use AAA
alkaline
batteries.
Using the remote
control
with yourTV
You can use your remote to control the TV, CABLE/DBS/
DTV, VCR, DVD or AUDIO.
The remote has been preset
to operate theTV and other Mitsubishi products.
It can be
set to control other brands of audio/video equipment.
To operate the "IV, the select switch at the top of the
remote should be set toTV.
r_l
I-_
0000
000
O O O
;;;oo
20
Advertisement
