Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch Professional GWS 14-125 CI Original Instructions Manual

OBJ_BUCH-2111-002.book Page 7 Tuesday, October 25, 2016 8:34 AM
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 Thumbwheel for speed preselection
(GWS 11-125 CIE/GWS 14-125 CIE)

Technical Data

Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure
01:2014
Protection class
Bosch Power Tools
4 On/Off switch
5 Auxiliary handle (insulated gripping surface)
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for grinding
13 Grinding wheel*
14 Protection guard for cutting*
15 Cutting disc*
16 Hand guard*
17 Rubber sanding plate*
18 Sanding sheet*
19 Round nut*
20 Cup brush*
21 Cutting guide with dust extraction protection guard *
22 Diamond cutting disc*
23 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ... 8-115
3 601 ... H20 ...
W 800
W 500
-1
min 11000
-1
min –
mm 115
M 14
mm 22
–
–
–
–
–
kg 1.9
kg 1.8
/II
English | 7
*
8-125 10-125
H27 ... H21 ...
800 1000
500 630
11000 11000
– –
125 125
M 14 M 14
22 22
– –
– –
– –
– –
– –
1.9 2.1
1.8 2.0
/II /II
1 609 92A 2VJ | (25.10.16)