Remote Control - Pioneer DV-525 Operating Instructions Manual

Remote Control
I ! ' ' 11
(Buttons indicated with * are used for menu operation.)
(_ (_) (standby/on) button
Press to switch the player on or to put in standby
(pages 24 and 27).
(_ AUDIO button
Press repeatedly to select one of the audio
languages andlor audio formats programmed on a
DVD (page 29).
For Video CD and CD, each press changes the audio
output as follows.
[-- stereo -* 1/L0-*_)-" Z/R(Right)--}
SETUP button"
Press when the player is in either play or stop mode o
to open and close the Setup screen (page 19),
(_ MENU button*
Use to display or close the DVD menu screen (page
Z5),
®
TOP MENU button*
Press to call up the top menu programmed on the
DVD, Depending on the DVD, the top menu may be
identical to the DVD menu (page 25).
® PREVIOUS P<</NEXT
During playback, press PREVIOUS _ to go back to
a previous chapter/track and NEXT _bl to advance
to the next chapterltrack (page 26).
® REV <I</FWD _ (fast reverse/forward)
buttons
During playback of DVD and Video CO. press
FWD _ to perform fast forward scanning, Press
REV _ to perform fast reverse scanning of DVD
and Video CD. When a CD is loaded, audio scanning
is performed (page 26).
® PAUSE It button
Press to pause playback of a disc. Press again to
resume playback (page 34),
®
STOP • button
Press to stop playback, Pressing once enables
playback to resume from a point shortly before the
location where it was stopped. Pressing twice
causes the disc to return to the beginning of the disc
when playback starts again (page 27).
Number buttons (1-9, 0, +10)*
Use to perform direct title and chapter/ttack
searches, and to input numerical values (pages 25.
35. and 39),
13