Two Vcrs For Tape Editing - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Two VCRs for Tape
Editing
Using
S VIDEO jacks?
See page 34.
If you connect two VCRs, you can record from one VCR to tile other while
using your LCD projection TV to monitor what is being recorded,
i i i ¸ ! ! ! ii< i i i ! i ¸¸
Using A/V cables, connect tile playback VCR's AUDIO and VIDEO
OUT jacks to the recording VCR's AUDIO and VIDEO IN jacks.
Using A/V cables, connect the recording VCR's AUDIO and VIDEO
OUT jacks to the LCD projection TV's AUDIO and VIDEO IN jacks.
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
A oo¢1 IJNE
OUT IN
LINE
IN
/ i¸¸¸5¸¸¸ i
AUDIO-L (white)
VIDEO (yellow) ................................ f
AN cable (not supplied)
A/V cable (not supplied)
I._ To perform tape editing, set the LCD projection TV to the video input
intended for playback by pressing TV/VIDEOon the remote control.
!_ You may need to change the video input on your VCR. Consult your
VCR'soperating manual for instructions.
/'_ If your VCRs haveS VIDEOjacks: For best picture quality, use an
S VIDEOconnection instead of the yellow video cable on your combined
AN cable.
Using an S VIDEOcable, connect the playback VCR'sS VIDEOOUT jack
to the recording VCR'sS VIDEOIN jack. S VIDEOdoes not provide audio,
so audio cables must be connectedto provide sound.
J_ You cannot record signals from equipment connected to the Y, PB,PR
input.
38