Panasonic EY6406 Service Manual page 4

Model EY6406 • EY6407 • EY6431
Ref. No. 2D Procedure 2A—2B-*2C—2D
Attachment for steel balls.
Reinstalling place 2pcs of steel balls into each of
the 6 holes. (See Fig. 10)
Steel balls
(2 pcs x 6 holes)
Driving block
Fig.10
Ref. No. 2E
Clutch "1
o
Procedure 2A-*2B—2C—2D—2E Attachment for the adjusting screw and the
- clutch handle.
Align the O mark of adjusting screw with the
center of upper projection of clutch case.
Turn the adjusting screw into driving block about
one rotation for clockwise direction.
Align the OO mark of adjusting screw with the
center of upper projection of clutch case.
Set the clutch handle with position 1 on top
Insert the clutch handle with adjusting the tabs
of adjusting screw to the groove of inside clutch
handle.
Clutch handle
OO mark
\ O mark
Projection
Adjusting screw
Driving block
Flg.11