Mac Filter Configuration - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Table 5-5 Parameters related to the IP address filter
Parameter
IP address filter function
Filter Mode
Protocol
LAN-side IP Address
LAN-side Port
WAN-side IP Address
WAN-side Port

5.5.2 MAC Filter Configuration

1.
Figure 5-18 MAC Filter Configuration
2.
Issue 02 (2011-12-08)
In the navigation tree on the left, choose Security > MAC Filter Configuration. In the
pane on the right, after enabling MAC filter and selecting the filter mode, click New. On
the dialog box that is displayed, configure the MAC filter rule for the PC to access the
Internet, as shown in Figure
Click Apply to apply the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates whether to enable the IP address filter function by
clicking OPEN or CLOSE.
Indicates the IP address filter rule of the blacklist or whitelist.
l Blacklist: indicates that the data meeting the rule in the filter
rule list is not allowed to pass.
l Whitelist: indicates that the data meeting the rule in the filter
rule list is allowed to pass.
The filter mode is global config mode. Thus, the blacklist and
whitelist mode cannot be used at the same time.
Indicates the type of the protocol, which may be TCP/UDP,
TCP, UDP, ICMP, or ALL.
Indicates the IP address on the LAN side.
Indicates the port ID on the LAN side. This parameter can be
configured when Protocol is set to TCP/UDP, TCP or UDP.
Indicates the IP address on the WAN side.
Indicates the ID of the WAN side port. This parameter can be
configured when Protocol is set to TCP/UDP, TCP or UDP.
5-18.
5 Web Page Reference
318