Table of Contents
Advertisement
Overview of the base station
M470/M475
1.
•
2. DC power jack
3. Telephone line jack
3 Get started
Caution
Make sure that you have read the safety
instructions in Chapter 1 'Important safety
instructions' before you connect and install
your handset.
Connect the base station
Warning
•
1
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the phone.
2
•
Use only the supplied power adapter to
charge the batteries.
3
Note
•
Use only the adapters provided.
•
Make sure the electrical outlets are not
controlled by wall switches.
•
Connect the power adaptor in a
The adapter's prong is not designed
to hold the weight of unit, so do not
connect it to any ceiling, under-the-
table, or cabinet outlets. Otherwise, the
adaptor may not properly connect to
the mains.
•
If you subscribe to the digital subscriber
line (DSL) high speed Internet service
through your telephone line, ensure you
prevents noise and caller ID problems
caused by the DSL interference. For more
your DSL service provider.
1. Connect each end of the power
adapter to:
• The DC input jack at the back of the base
station;
• The power socket on the wall.
only.
EN
7
Advertisement
Table of Contents
