Table of Contents
Advertisement
2.1 Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury
or death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
2.2 General safety instructions
WARNING: Read the warning instructions that
follow before you use the product.
The service center that repairs the product must have
safety devices that obey local regulations. Warnings and
cautions are used to point out specially important parts
of the workshop manual.
2.3 Special safety instructions
•
Apply a new warning label if a warning symbol on
the product is damaged or missing.
•
Do not use accessories or spare parts that are not
approved by the manufacturer. Do not do changes
that are not approved by the manufacturer. This
can cause injury or death to the operator or other
persons.
•
Use protective gloves and eye protection. Approved
protective goggles must agree with the ANSI Z87.1
standard in the USA or EN 166 in EU countries.
•
When you use compressed air, do not point the
airflow in the direction of your body. Air can go into
the blood circulation and kill you.
•
Use approved hearing protection. Noise from the
product can result in permanent hearing loss.
•
The product can cause sparks. Do not operate the
product near flammable materials.
2.3.1 To remove the battery
WARNING: Always remove the battery before
you do repairs or do servicing on the product.
4 - Safety
2 Safety
WARNING: Do not put the battery in the battery
holder before the product is assembled.
•
Push the battery release button (A) and remove the
battery (B).
2.4 Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection.
This product complies with applicable EC
Directives.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
A
B
1597 - 003 - 05.07.2023
Advertisement
Table of Contents
