Advertisement
buttons on the set simultaneously.
"TT" will appear on the top right hand corner of the screen.
Press "MENU" on the remote control to get the service menu on screen
Navigate the menu by moving the joystick up and down.(green and blue)
Press the joystick down to select an adjustment.
Turn TV off to exit service mode
Test mode 2 allows entry of TT numbers to perform some functions. The
important numbers for this chassis are given below
TT00,10,20,30,40 pressing these numbers will switch the TT mode
off
TT01 switch service menu on
TT08 set the set to shipping condition
TT21 picture rotation automatic function
TT25 Status menu display
TT49 New initialisation
----------------------------------------------------------------------
----------
Models. KV28FD1E KV28FD1K KV32FD1E KV32FD1K GE-1 chassis
To enter the service mode:
Turn the mains power on while holding the "PROG +" and the "PROG -"
buttons on the set simultaneously.
"TT" will appear on the top right hand corner of the screen.
Press "MENU" on the remote control to get the service menu on screen
Navigate the menu by moving the joystick up and down.(green and blue)
Press the joystick down to select an adjustment.
Turn TV off to exit service mode
The main adjustments are:
MCP CXA2101 - picture (colour, drives, brightness etc)
Deflection control SDA9361 - geometry
----------------------------------------------------------------------
----------
Advertisement
