Music Stand Їпвїа!!А1Їїоп; Id Function - Yamaha DX27 Owner's Manual

—— ————
9, AC Power Adaptor
(DX27 only)
10. Music Stand
Installation
11. ID Function
computers, 610.) as follows:
RED - cassette deck microphone input.
WHITE — cassette deck earphone output.
BLACK - cassette deck remate input (where applicable),
Plug the PA-1210 AC Power Adaptor (supplied standard with the DX27) DC output
cord inte the DC IN jack on the DX27 rear panel, Then plug the power adaptors
AC cord into an AC mains outlet. Be sure that your local line voltage matches that
specified on the РА- 1210.
MOTE дд н LET LJ.
When setting up your system, be sure to turn ON the DX27 (and any effects
unita used) BEFORE turning ON tha main amplifier system. This will prevent
the initial power-on shock surge from possibly damaging your amplifier and
speaker system, |
The music stand supplied with the 0Х27/275 fits inta the two sockets on the rear
рата! (see diagram).
It Із possible to change the "Welcome to DX!" (DX27), "&YAMAHA DX275*"
(DX275) massage which appears when the power is first switched ON to anything
you like—your name, for example. To change the ID, hold the KEY SHIFT button
while turning the power ОМ, The currant ID message will ba displayed with à cursor
over the first character
[Welcome to ІШ or [+ YAMAHA DX2TS W]
|
Choose the position to enter a new character, then using the DATA ENTRY slider
оғ buttons, select the new character from the available character 861.
WENGE NAME CHAAR FE В
BPare | "афтад (1 *.—,. 701234 BET 3
te'a2anacptFaHijRHLMNDPORSTU
wwkKYZ[ I" ^"abcdeighijkimnanpad
r&üuvwaypsczlil EE-
ы. т =
/