Philips 32PFL7605C User Manual page 62

Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select one of the following options, then
press OK:

[Off]: Turn off TV speakers.

[On]: Turn on TV speakers.

[EasyLink]: TV audio continues to be
streamed through the TV speakers.
Switch the TV audio to the connected
HDMI-CEC audio device through the
experience menu.

[EasyLink autostart]: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Switch TV audio in experience menu
If [EasyLink] or [EasyLink autostart] are
selected, access the experience menu to
switch the TV audio.
1. While watching TV, press
Use HDMI ARC
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital
audio to an HDMI Home Theatre System.
HDMI ARC allows you to use Philips
EasyLink to output TV audio directly to a
connected audio device, without the need
for an additional digital audio cable.
Be sure that the device is HDMI-CEC and
ARC compliant, and that the TV is
connected to the device using an HDMI
cable attached to HDMI ARC connectors.
EN 62
.
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:

[TV]: On by default. Streams TV audio
through TV speakers until the
connected HDMI-CEC audio device
switches to system audio control.
Thereafter, TV audio is streamed
through the connected device.

[Amplifier]: Streams audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio will continue to stream
from TV speakers if [EasyLink] was
selected. If [EasyLink autostart] was
enabled, the TV prompts the connected
device to switch to system audio mode.
Enable or disable HDMI ARC
Note: Enabling HDMI ARC automatically
adds the device to the home menu.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [HDMI 1 - ARC] > [On] or
[Off].
3. Press OK to activate.