Table of Contents
Advertisement
srt
Using AC power
An AC adaptor (AD-5, optional) is required when using household current. Use
only genuine CASIO adaptor with the same voltage rating (100, 117, 220 or 240V) as
the power supply in your area to prevent damage to internal components. Be sure to
turn the power of the unit off before you connect the adaptor to the unit. Plug the
AC adaptor into the AC outlet and the cord into the unit. This will automatically cut
off the battery power supply.
Using a car's cigarette lighter
With the car adaptor (CA-5, optional), DC power is sipplied from a car battery
through
the cigarette lighter. Be sure to turn the power of the unit off before you
connect the adaptor to the unit.
p77 AC adaptor AD-5
DC 9V Jack
/
Cigarette lighter socket
Car battery adaptor CA-5
Important!
* The adaptor may become warm when it is being used. This is normal and does
not indicate any problem.
« Be sure to unplug the adaptor from the power source when you are not using the
unit.
* Whenever connecting or disconnecting the adaptor, be sure that the power of
the unit is switched off.
* Be sure to unplug the car adaptor from the cigarette lighter socket when you are
not using the unit. Leaving the car adaptor plugged in can cause damage or can
run down your car's battery.
* Never connect the car adaptor to a 24V DC cigarette lighter (in a bus or truck).
Doing so can damage the unit.
* Certain makers of cars may have non-standard cigarette lighter shapes or sizes.
Be sure to check the size of your car's cigarette lighter before using the car
adaptor.
;
:
* Never use a power supply that does not match that specified for the unit. Doing
so can damage the adaptor or your unit.
Auto Power Off Function
The Auto Power Off function automatically switches power off if you do not
perform ony operation for about six minutes.
You can also use the following
operation to cancel the Auto Power Off function so that it does not switch power off.
E-12
came
met mesic
petnte
Oe
HREM AE
seagrass
Bente Bem,
To cancel the Auto Power Off function
Setting
Initialized Default.
Displayed Number
Tone number
Local Control On/Off
Advertisement
Table of Contents
