Part Names - Sharp FX-S120 Operation Manual

PART NAMES

MAIN BODY
6
5
2 3 4
1
1 Air Inlet
(Left and Right)
2 Side Panel
(Left and Right)
3 Pre-Filter
(Left and Right)
4 Deodorizing Filter
(Left and Right)
5 Micro HEPA Plus Filter
6 Handle
(Left and Right)
7 Air Outlet
8 Operation Panel
9 Light Sensor
10 Display
Cleanliness Indicator
Indicates the air purity of the room in 5 levels with
color changes.
11
Clean
Blue
Yellow (Flashing)
Impure
Red (Flashing fast)
12 Air Outlet
(Front)
13 Unit* Cleaning Brush
Unit (Plasmacluster Ion Generating Unit)
14
(Left only)
15 Unit Holder
(Left only)
16 Sensitive Dust Sensor
17 Sensor Filter
8
7
10
11
12
18 Sensor Cover
19 Sensitive Odor Sensor
20 Sensor
21 Power Cord
(Left and Right)
22 Power Plug
* The Unit refers to Plasmacluster Ion Generating Unit. (The
LIGHT SENSOR
When the Light Control (Display Brightness) is set
to "Auto", the Display and Cleanliness Indicator will
automatically switch ON or OFF based on room
brightness. (Page 13)
NOTE
Do not install the product in the following places. The
Light Sensor may not sense correctly.
(Left only)
(Internal)
EN-5
Back Side
9
16
17
18
13 14 15
21
(Internal)
Temperature / Humidity
(Shape of power plug depends on country.)
same as below.)
Detection range of Light Sensor
In the shadow
Directly under
a light fixture.
19 20
22
(Internal)